Skip to content
Free UK Mainland Delivery for Orders Over £99 - Need some advice? Talk to the team on 0151-236-7800
Free UK Mainland Delivery for Orders Over £99

Quested S7R MkIII - Active 2-way near-field monitor 70w/120w RMS - Single

by Quested
£1,128.00 inc. vat
£940.00 ex. vat
SKU SQUES7R
Please contact us for availability.

Quested S7R MkIII - Single

The Quested S7R MkIII is an active 2-way monitor with powered by two class A-B amplifiers capable of delivering a total of 190 Watts RMS which are mated to an enclosure tuned with a double flared port designed to minimise any possible low frequency “chuffing”. The result is an extremely powerful, neutral, articulate and accurate compact monitor perfect for a wide range of music styles from acoustic jazz to house.

The frequency response is more than adequate for most applications, it can however be extended down to 25Hz when coupled to the SB10R sub-woofer. The S7R is fully magnetically shielded, so can be used in close proximity to CRT monitors.

All S-Series monitors are phase coherent with each other enabling them to be used in combination in 5.1 multi-channel systems

Some typical applications include components in multi-channel systems, postproduction, project studios, location recording, and mastering.

Specifications

  • Size (W x H x D): 244 x 347 x 308 mm
  • Weight: 11.7 kgs
  • Drivers:
    • Bass cone - 1 x 165 mm (6 1/2 ")
    • High Frequency soft dome - 1 x 28 mm (1 ")
  • Maximum SPL: 107dB (c) continuous pink noise @ 1 m (119º dB (c) per pair RMS music)
  • Frequency Response: 65 Hz-20 kHz ± 2 dB
  • Input Connector: XLR and 1/4 inch Jack combo socket
  • Impedance: 10k electronically balanced with RF filters
  • Wiring: Pin 1 ground Sleeve, Pin 2 hot Tip, Pin 3 cold Ring
  • Sensitivity: -12 dBu to +6 dBu for 96 dB SPL @ 1 m set by 10 position rotary switch on rear
  • Filters:
    • Subsonic: -3 dB @ 30 Hz, 24 dB/oct
    • Ultrasonic: -3 dB @ 75kHz, 4 dB/oct
  • Crossover: 1k19
  • LF EQ: -2/-4 @ 65 Hz
  • HF EQ: +/- 2 dB @ 10 kHz
  • LF output power: > 120W RMS
  • HF output power: > 70W RMS
  • T.H.D.: < 0.03% at levels up to 1 dB below clip, 20 Hz-20 kHz. typ 0.005% @ 1kHz
  • Hum + Noise: > -100 dB referred to clip
  • Power on: Front mounted green LED indicates power applied
  • Clip: Red LED 2 dB before amplifier clip