PMC MB2S-A Active Monitors in Neo Black. (Pair)
The PMC MB2S-A is high end active monitor that is perfect for mid sized control rooms either soffit mounted or on it's custom studio stands (sold separately). Unlike other monitors of this size the MB2S-A allows for high SPL's without distortion.
The PMC MB2S-A includes the PMC 75 mid driver, the Radial low frequency driver that allows for massive controlled excursions whilst avoiding the effects of power compression thanks to its cast alloy exo-skeleton which cools the woofer and it's rear vented magnet.
Every element has been designed and manufactured purely for its performance and encompasses the smallest detail from individual cable choice through to hand selection of capacitors in the active crossover networks. This level of resolution cannot be achieved with standard technology and average tolerances.
PMC MB2S-A Active Monitor Specifications:
- Amplifier Power per Channel: LF 325W, MF 120W, HF 120W
- Available Finishes: Neo Black
- Crossover Frequency: 380Hz & 3.8kHz
- Dimensions: H 870mm 34.25" W 380mm 14.96" D 535mm 21.06"
- Drive Units: LF 310mm PMC Radial™ driver, MF 75mm PMC fabric dome , HF 27mm fabric soft dome
- Effective ATL™ Length: 3m 10ft
- Impedance: 4 Ohm Nominal
- Input Connectors: 3 Pairs 4mm Sockets (Tri-wire or Tri-Amp)
- Sensitivity: 91dB 1W 1m
- Useable Frequency Response: 20Hz-25kHz Peak SPL @ 1M: 124dB
- Weight: 49kg 108lbs
- Additional Information
Manufacturer PMC SKU SPMCMB2SA Model PMC MB2S-A Pair GTIN No Single or Pair Pair