Skip to content
Free UK Mainland Delivery for Orders Over £99 - Need some advice? Talk to the team on 0151-236-7800
Free UK Mainland Delivery for Orders Over £99

Neutrik XIRIUM PRO TX Analog line input module (NXP-TM-ANA-E)

by Neutrik
£267.60 inc. vat
£223.00 ex. vat
SKU RNEUNXPTMANAE
In Stock - Available for Immediate Dispatch

Neutrik XIRIUM PRO NXP-TM-ANA-E

The Neutrik XIRIUM PRO NXP-TM-ANA-E is an Analog Line Input Module for the XIRIUM PRO Europe Transmitter TX (NXP2TX-E). 

With DiWA (Digital Wireless Audio) Neutrik has developed a technology for digital data transmission achieving high fidelity without data compression. A digital, uncompressed audio stream of 24 bit/48 kHz requires a bandwidth of 1.15 MHz. Such an amount of data can not be transmitted in the UHF band without using a compander. By choosing the 5 GHz band XIRIUM PRO provides 20 MHz bandwidth. Despite employing wireless technology, audio signals are transmitted at the level of quality found in a recording studio.

Specifications

GENERAL SPECIFICATIONS

  • Radio frequency carrier range: IEEE 802.11a, UNII-3 band from 5725 MHz to 5825 MHz (channels 149-165), license-free
  • Data protocol: Proprietary (DiWA technology)
  • Transmit power: Conducted 8 dBm / 14 dBm (with 6 dBi antenna)
  • Range: Up to 500 m point to point (LOS), longer range depending on obstacles, reflexions, interferences, XROC mode

AUDIO PERFORMANCE (ANALOG TO ANALOG PER WIRELESS LINK)

  • THD + Noise (TX Gain = min.): < 0.01 % @ 1 kHz, 4 dBu / < 0.05 % @ 20 Hz – 10 kHz, 4 dBu
  • Frequency response: +0.5 dB / -1.5 dB @ 20 Hz – 20 kHz ref. 1 kHz
  • Dynamic range: > 105 dB @ 1 kHz, A-weighted
  • Crosstalk: < -80 dB @ 20 kHz
  • Number of audio channels @ 24 mbps: 2
  • Number of audio channels @ 6 mbps: 1 (XROC mode)
  • Converter resolution (ADC & DAC): 24 bit
  • Sampling rate: 48 kHz
  • Latency (Delay): 3.6 msec (analog to analog)
  • Transmission method: Compression-free, no reduction of converted data
  • Operating temperature: 32° F to +122° F / 0 °C to +50 °C
  • Storage temperature: -4° F to +176° F / -20 °C to +80 °C

ADDITIONAL DIGITAL AUDIO INTERFACES

  • AES/EBU: 24 bit / 48 kHz according to AES3-2003
  • Dante AoE (Audio over Ethernet): proprietary protocol by Audinate®

TX SPECIFIC CHARACTERISTICS

  • Antenna 5-6 GHz – Audio Transmission: Omni-directional, 6 dBi, 25° Elevation and 360° Azimuth, N-connector male (direct mount)
  • Antenna 2.4 GHz – Monitor & Control: 1/2 wave dipole with SMA female connectors
  • Number of audio channels @ 24mbps: 2
  • Number of audio channels @ 6mbps: 1 (XROC mode)

ANALOG INPUT SPECS

  • Input Mode - Line balanced
    • Input Level
    • Input Imp.: 10 kOhm
    • Rated Source Imp.: 1000 Ohm
    • Max.: 22 dBU (maximum input level before signal overflow, 0 dBu = 0.775 V rms)
    • Connector type: XLR
  • Indicators: LEDs: Power ON / Start Up / Low Battery Status / XROC mode / Linking Process / Audio transmission
  • Controls: Power ON / Linking Process / XROC mode
  • Power Supply: Mains input over powerCON TRUE1 (100-240 VAC 50/60 Hz) or internal battery (typical battery runtime 10 hours, depending on type of module, XROC mode, number of charging cycles and operating temperature)