My Cart Checkout Speak to an expert! Call us on 0151 236 7800 0151 236 7800
Neutrik XIRIUM PRO RX Repeater Module - Mains Power Only Permanant Install Version (NXP-RM-RP-E-PI)

Neutrik XIRIUM PRO RX Repeater Module - Mains Power Only Permanant Install Version (NXP-RM-RP-E-PI)

£169.50 (inc. vat)
£141.25 (ex. vat)

Brand: Neutrik

Usually Ships in 1 - 3 Days

The Neutrik Xirium Pro NXP-RM-RP-E-PI is the permanent installation version of the NXP-RM-RP-E, this PI version does not feature battery power and must be mains powered.

The Neutrik XIRIUM PRO NXP-RM-RP-E-PI is a Repeater Module for the XIRIUM PRO Europe Receiver RX Base Station (NXP2RX-E).

Interested in hiring this product?
Send an enquiry now.
Add this item to your Wishlist.
OR
Description

Neutrik XIRIUM PRO RX Repeater Module - Mains Power Only Permanant Install Version (NXP-RM-RP-E-PI)

The Neutrik Xirium Pro NXP-RM-RP-E-PI is the permanent installation version of the NXP-RM-RP-E, this PI version does not feature battery power and must be mains powered.

The Neutrik XIRIUM PRO NXP-RM-RP-E-PI is a Repeater Module for the XIRIUM PRO Europe Receiver RX Base Station (NXP2RX-E).

Exceeding boundaries
The repeater is the perfect extension of the system: When used, the system range can be doubled, and walls, corners, or other obstacles may be overcome.

Extended true diversity for even more reliable reception
Since the repeater duplicates and forwards the signals received from the transmitter it becomes a second, redundant audio source for every receiver. Each receiver automatically selects the best signal and switches between them without interruption.

With DiWA (Digital Wireless Audio) Neutrik has developed a technology for digital data transmission achieving high fidelity without data compression. A digital, uncompressed audio stream of 24 bit/48 kHz requires a bandwidth of 1.15 MHz. Such an amount of data can not be transmitted in the UHF band without using a compander. By choosing the 5 GHz band XIRIUM PRO provides 20 MHz bandwidth. Despite employing wireless technology, audio signals are transmitted at the level of quality found in a recording studio.

Specifications

SPECIFICATIONS

GENERAL SPECIFICATIONS

  • Radio frequency carrier range: IEEE 802.11a, UNII-3 band from 5725 MHz to 5825 MHz (channels 149-165), license-free
  • Data protocol: Proprietary (DiWA technology)
  • Transmit power: Conducted 8 dBm / 14 dBm (with 6 dBi antenna)
  • Range: Up to 500 m point to point (LOS), longer range depending on obstacles, reflexions, interferences, XROC mode

AUDIO PERFORMANCE (ANALOG TO ANALOG PER WIRELESS LINK)

  • THD + Noise (TX Gain = min.): < 0.01 % @ 1 kHz, 4 dBu / < 0.05 % @ 20 Hz – 10 kHz, 4 dBu
  • Frequency response: +0.5 dB / -1.5 dB @ 20 Hz – 20 kHz ref. 1 kHz
  • Dynamic range: > 105 dB @ 1 kHz, A-weighted
  • Crosstalk: < -80 dB @ 20 kHz
  • Number of audio channels @ 24 mbps: 2
  • Number of audio channels @ 6 mbps: 1 (XROC mode)
  • Number of receivers: Unlimited number of RX clients
  • Converter resolution (ADC & DAC): 24 bit
  • Sampling rate: 48 kHz
  • Latency (Delay): 3.6 msec (analog to analog)
  • Transmission method: Compression-free, no reduction of converted data
  • Operating temperature: 32° F to +122° F / 0 °C to +50 °C
  • Storage temperature: -4° F to +176° F / -20 °C to +80 °C

RX SPECIFIC CHARACTERISTICS

  • Antenna 5-6GHz - Audio Transmission: Directional, 14dBi, 35° Elevation and 40° Azimuth, N-connector male
  • Antenna 2.4GHz - Control Data Transm.: 1/2 wave dipole with SMA female connectors
  • Number of audio channels: 2

ADDITIONAL DIGITAL AUDIO INTERFACES

  • AES/EBU: 24 bit / 48 kHz according to AES3-2003
  • Dante AoE (Audio over Ethernet): proprietary protocol by Audinate®

ANALOG OUTPUT SPECS

  • Output Type - Line Output (balanced)
    • Output Level
    • Output Imp.: < 800 Ohm
    • Rated Load Imp.: 10 kOhm
    • Nominal*: 0 dBU (* if TX source = 0 dBu)
    • Max. Level: 22 dBU

OTHER

  • Indicators: LEDs: Power ON / Start Up / Low Battery Status / Audio Delay / Linking Process / Audio Reception
  • Controls: Power ON / Linking Process / Audio Delay
  • Power Supply: NXP-RM-RP-E-PI: Mains input over powerCON TRUE1 (100-240 VAC 50/60 Hz)
Additional Information

Additional Information

Manufacturer Neutrik
SKU RNEUNXPRMRPEPI
Model NXP-RM-RP-E-PI
GTIN NA