Skip to content
Free UK Mainland Delivery for Orders Over £99 - Need some advice? Talk to the team on 0151-236-7800
Free UK Mainland Delivery for Orders Over £99

Neumann KM 183 stereo set - Omni-directional microphones - Nickel

by Neumann
£1,308.00 inc. vat
£1,090.00 ex. vat
SKU SNEUKM183ST
Please contact us for availability.

Neumann KM183 Stereo Set - Omni Microphones - Nickel

The Neumann KM183 Stereo Set is a matched, stereo pair of KM 183 omni-directional microphones in nickel, two Stand mount swivels SG 21/17 mt, two windscreens WNS 100 and a robust wooden storage box. The KM 183 has a slender shape and advanced transmission characteristics that make it especially suitable for a very wide range of tasks in the radio and television sector, as well as recording applications.

The KM 183 microphone is the successor of the well proven KM 83, which has been used since the seventies worldwide with great success. The KM 183 is an omni-directional pressure transducer with a boost of approximately 7 dB at 10 kHz in the free field. In the diffuse sound field it has a flat frequency response. Transformerless circuitry and balanced output result in high output gain with a very low noise floor and no colouration to the output signal.

The microphone operates without any problems, even if the input of following equipment happens to be unbalanced, for example as in some DAT/CF recorders. The output of the KM 183, as in all Neumann microphones, is balanced and phantom (48V) powered. The KM 183 mt stereo set is ideal for X,Y (with cardioid mic and baffle plate) stereo miking, ambiance miking or spot miking instruments such as piano, wind instruments organ and choir.

In The Box

  • 2 x Microphone KM 183 MT - Nickel
  • 2 x Stand mount swivel SG 21 bk
  • 2 x Windscreen WNS 100
  • Wooden box

Specifications

  • Acoustical operating principle: Pressure transducer
  • Directional pattern: omnidirectional
  • Frequency range: 20 Hz ... 20 kHz
  • Sensitivity at 1 kHz into 1 kohm: 12 mV/Pa
  • Rated impedance: 50 ohms
  • Rated load impedance: 1 kohms
  • Equivalent noise level, CCIR1): 24 dB
  • Equivalent noise level, A-weighted1: 13 dB-A
  • Signal-to-noise ratio, CCIR1 (rel. 94 dB SPL): 70dB
  • Signal-to-noise ratio, A-weighted1 (rel. 94 dB SPL): 81dB
  • Maximum SPL for THD 0.5%2): 140dB
  • Maximum output voltage: 10 dBu
  • Supply voltage (P48, IEC 61938): 48 V +/- 4 V
  • Current consumption (P48, IEC 61938): 3.2 mA
  • Matching connectors: XLR 3F
  • Weight: approx. 80 g
  • Diameter: 22 mm
  • Length: 107 mm