My Cart Checkout Speak to an expert! Call us on 0151 236 7800 0151 236 7800
Klotz & Neutrik Bantam Jack to 6.35mm Balanced Jack Socket Patch Cable 1m Black

Klotz & Neutrik Bantam Jack to 6.35mm Balanced Jack Socket Patch Cable 1m Black

£15.00 (inc. vat)
£12.50 (ex. vat)

Usually Ships in 1 - 3 Days

The Klotz & Neutrik Bantam Jack to Balanced Jack Socket is build using Klotz MY204SW Patch Cable, Neutrik NP3TTP-1-B bantam and Neutrik NJ3FC6-BAG jack socket by out in house service team. The MY204SW is ideal for patch cable, midi cable, stable microphone cable with ultra-low outer diameter. Its braided shield offers superior tensile strength, making the MY204 suitable for uses such as XLR fan-outs or XLR patch panels. The MY204 features a copper drain wire in contact with the braided shield, which can significantly speed up custom cable production.
Interested in hiring this product?
Send an enquiry now.
Add this item to your Wishlist.
OR
Description

Klotz & Neutrik Bantam Jack to Balanced Jack Socket

The Klotz & Neutrik Bantam Jack to Balanced Jack Socket is build using Klotz MY204SW Patch Cable, Neutrik NP3TTP-1-B bantam and Neutrik NJ3FC6-BAG jack socket by out in house service team. The MY204SW is ideal for patch cable, midi cable, stable microphone cable with ultra-low outer diameter. Its braided shield offers superior tensile strength, making the MY204 suitable for uses such as XLR fan-outs or XLR patch panels. The MY204 features a copper drain wire in contact with the braided shield, which can significantly speed up custom cable production.

Neutrik NP3TTP-1-B are assembled using a special crimp tool, which includes a special part to fit the non-removable strain relief. They are available with black or red shells and metal rear bush. Spare coloured shells are type BSTT. Neutrik NJ3FC6-BAG is a 3-pole jack sockets in panel mounted or in-line versions. Panel mount type can be front or reverse mounted (the latch bar must be removed if reverse mounted) in a 24mm cutout. In-line types have cable gland as on ‘X’ series XLR connector, clamping on cables 2.8 to 8.0mm diameter.

Specifications

SPECIFICATIONS

  • Connection Type: Plug
  • Gender: Male
  • Contact resistance: Depends on mating connector mΩ
  • Dielectric strength: 1 kVdc
  • Insulation resistance: > 2 GΩ (initial)
  • Rated current per contact: Depends on mating connector A
  • Rated voltage: < 50 V
  • Transmission Performance: Null
  • Cable O.D.: 4 - 4.8 mm
  • Crimp size: 5,41 Hex crimp (shield) acc. IEC 60803 (die designation D)
  • Lifetime: > 1000 mating cycles
  • Wiresize: 0,25 mm²
  • Wiresize: 24 AWG
  • Wiring: Solder contacts
  • Bushing: Polyacetal (POM) + PU
  • Contact plating: 2 µm Ni (Su)
  • Contacts: Bronze (CuSn6) (Tip)
  • Insert: Polyamide (PA 6.6 30 % GR)
  • Shell: Brass (CuZn39Pb3)
  • Shell plating: Polyamide (6 30% GR) (red)
  • Standard compliance: MIL-P-642/13
  • Solderability: Complies with IEC 68-2-20
  • Temperature range: -20 °C to +65 °C
Additional Information

Additional Information

Manufacturer Klotz & Neutrik
SKU SCABBANTAMFTRS1MA
Model SCABBANTAMFTRS1MA
GTIN NA
Single or Pair No