Skip to content
Free UK Mainland Delivery for Orders Over £99 - Need some advice? Talk to the team on 0151-236-7800
Free UK Mainland Delivery for Orders Over £99

Klotz & Neutrik 1.5m Pro Female XLR to 1/4" TRS Jack Made With NP3X Jack

£13.14 inc. vat
£10.95 ex. vat
SKU SCABFXLRJACKHI1.5MA
Usually Ships within 24 hours.

Klotz & Neutrik 1.5m Female XLR to 1/4" Jack

The Klotz & Neutrik Female XLR to 1/4" Jack is made using heavy duty professional phone plugs that improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields.

Features

  • Extra slim 1/4" plug for highest packing density
  • Robust diecast shell in stylish design
  • Proven chuck type strain relief for reliable cable retention
  • Sleek design for best handling convenience
  • Precision machined one-piece contacts - avoid hook up of tip contact

Specifications

Neutrik NP3X

  • Contact resistance: depends on mating connector mΩ
  • Dielectric strength: 1 kVdc
  • Insulation resistance: > 2 GΩ (initial)
  • Rated current per contact: depends on mating connector A
  • Rated voltage: < 50 V
  • Cable O.D.: 4 - 7 mm
  • Lifetime: > 1000 mating cycles
  • Wiresize: 1 mm ²
  • Wiresize: 18 AWG
  • Wiring: Solder contacts
  • Bushing: Polyacetal (POM) + PU
  • Contact plating: 2 µm Ni (Su)
  • Contacts: Brass (CuZn39Pb3)
  • Insert: Polyamide (PA 6.6 30 % GR)
  • Shell: Zinc diecast (ZnAl4Cu1)
  • Shell plating: Nickel
  • Strain relief: Polyacetal (POM)
  • Standard compliance: IEC 60603-11 / EIA RS-453
  • Solderability: Complies with IEC 68-2-20
  • Temperature range: -20 °C to +65 °C