My Cart Checkout Speak to an expert! Call us on 0151 236 7800 0151 236 7800
Earthworks 1022 - Two Channel Preamp - 1U

Earthworks 1022 - Two Channel Preamp - 1U

£2,199.00 (inc. vat)
£1,832.50 (ex. vat)

Brand: Earthworks

In Stock

The Earthworks 1022 is a 1U two channel preamp for Earthwork microphones. This Preamp is part of the ZDT Zero Distortion Preamplifier series that's based on discrete circuitry designed by David Blackmer, establishing a new standard of sonic excellence in electronics. These preamps are so fast, so clean and so transparent that you don’t even know they are there. It is like plugging your microphone into a “piece of wire with gain”.
Interested in hiring this product?
Send an enquiry now.
Add this item to your Wishlist.
OR
Description

Earthworks 1022

The Earthworks 1022 is a 1U two channel preamp for Earthwork microphones. This Preamp is part of the ZDT Zero Distortion Preamplifier series that's based on discrete circuitry designed by David Blackmer, establishing a new standard of sonic excellence in electronics. These preamps are so fast, so clean and so transparent that you don’t even know they are there. It is like plugging your microphone into a “piece of wire with gain”. You will hear clarity and detail with the ZDT preamps that is not available in any other preamp at any price.

The 1021 also provides frequency response from 1Hz to 200kHz +0.5dB, a rise time of 0.27 microseconds and distortion of less than 1 part per million (0.0001%), eliminating all possibility of sonic degradation.

Earthworks 1022 Features

  • Zero Distortion – less than one part per million
  • High output level +30dBu
  • Very low output impedance will drive long lines without interference or signal loss
  • True 48 volt phantom, polarity reverse & clip indicator
  • Separate XLR & 1/4” Phone (t-r-s) outputs, each with its own gain/level controls
  • 1/4” phone connector output will drive balanced or unbalanced inputs
  • Full differential (balanced) from XLR in to XLR out – no internal conversion to single-ended
  • All discrete components; Class A amplification (no ICs in the signal path)
  • Greater transparency with minimum signal path and minimum features
Specifications

SPECIFICATIONS

  • Preamp Type: Solid State
  • Number of Channels: 2
  • Frequency Response: 2Hz to 100kHz ±0.1dB, 1Hz to 200kHz ±0.5dB
  • Impulse Response: 1.4µs
  • Distortion: XLR out: less than 1ppm (0.0001%); 1/4” out: 0.001%
  • Input Noise: 1.6nVHz½ at 20dB gain; 0.6nV/Hz½ at 60dB gain
  • EIN: -132dBV at 20dB gain; -143dBV at 60dB gain
  • Slew Rate: 22V/µs
  • Output DC Offset: ±1 mV typical, servo balanced
  • Power Requirement: 120V AC (100V and 200-240V versions available)
  • Input: 2 XLR Female balanced transformerless
  • Input Impedance: 10KΩ phantom on, 100KΩ phantom off
  • Outputs:
    • 2 XLR Male balanced transformerless (stepped)
    • 2 ¼” TRS XLR Fem. balanced transformerless (variable)
  • Dimensions: 1 rack space 1.75” x 19” x 10.375”
  • Weight: 6 lb. (2.7kg)
Additional Information

Additional Information

Manufacturer Earthworks
SKU SEAR1022
Model 1022
GTIN 827517112008
Single or Pair No