My Cart Checkout Speak to an expert! Call us on 0151 236 7800 0151 236 7800
Dynaudio M3XE package (including 2x M3XE + 2x PLM 12k44)

Dynaudio M3XE package (including 2x M3XE + 2x PLM 12k44)

£33,814.80 (inc. vat)
£28,179.00 (ex. vat)

Brand: Dynaudio

Usually Ships in 1 - 3 Days

The Dynaudio M3XE is a professional 3-way monitors built with Dynaudios newest driver technology allowing these monitors to take over where others fail. With its 22Hz - 21kHz frequency range and a 133dB SPL these studio monitors provide you with clear and precise audio. This monitor not only sounds amazing but looks professional, it's huge 30cm woofers, coil tweeter and wire voice coil midrange drivers are sure to catch the attention of all who pass it. These monitors are also Bi-amped with a passive crossover between mid and high. If all that wasn't enough each channel has impedance-correction providing the amazing working conditions for the amplifier.
Interested in hiring this product?
Send an enquiry now.
Add this item to your Wishlist.
OR
Description

Dynaudio M3XE package

The Dynaudio M3XE package is a professional 3-way monitors built with Dynaudios newest driver technology allowing these monitors to take over where others fail. With its 22Hz - 21kHz frequency range and a 133dB SPL these studio monitors provide you with clear and precise audio. This monitor not only sounds amazing but looks professional, it's huge 30cm woofers, coil tweeter and wire voice coil midrange drivers are sure to catch the attention of all who pass it. These monitors are also Bi-amped with a passive crossover between mid and high. If all that wasn't enough each channel has impedance-correction providing the amazing working conditions for the amplifier. This package also comes with two 12k44 amplifiers.

features

  • Three-Way Main Monitor
  • Handcrafted drivers
  • For in-wall or free standing setups
  • Matched with Lab.gruppen PLM 12k44 amplifier
  • Made in Denmark
Specifications

SPECIFICATIONS

  • System: 3-way Active Main Monitor
  • Frequency Response (±3dB): 22Hz - 21kHz
  • Peak SPL 1m, pair (IEC Short Term): > 135dB peak
  • Resonance Frequency: 24Hz
  • Internal Cabinet Volume: 145 liters
  • Bass Principle: Bass reflex
  • Amplifier: 1 Lab-gruppen PLM10000Q (pr. speaker). Preset: M3XE V06
  • Tweeter: Esotar² 28mm soft dome Magnetic fluid, Metal rear chamber, Pure alu wire voice coil, 4 mm die-cast alu front, Neodym magnet material
  • Midranges: 15cm with 75mm diameter pure alu wire voice coil, MSP-cone, long stroke
  • Woofers: Esotar 30cm with 75 mm diameter pure cupper wire voice-coil, MSP-cone, long stroke
  • Weight: 65kg
  • Dimensions (W x H x L): 555 x 775 x 505mm
  • Cabinet: 25mm MDF. Strategically braced and damped. Low turbulence reflex-ports. Separate chambers for each woofer.
  • Crossover: All 4 channels: Active dsp-based in-amp Lake processor. Each channel has impedance-correction providing the best working conditions for the ampflifier.Specification sheet for M Series part 1

  • Model: 12k44
  • Number of amplifier channels: 4
  • Max out Power per Channel (4 ohms, all channels driven): 3000W
  • THD + N at 1 kHz and 1 dB below clipping: < 0.04 %
  • Dynamic Range: > 114dB
  • Channel separation (Crosstalk) at 1 kHz: > 70dB
  • Inputs: Analog, AES/EBU & Dante
  • Analog Input Sample Rate / Resolution: 96kHz / 24bit
  • Weight: 16.5kg (36lbs)
  • Dimensions (WxHxD): 483 (19") x 88 (2 U) x 424mm (16")
Additional Information

Additional Information

Manufacturer Dynaudio
SKU SDYNM3XEPACK
Model M3XE-12k44
GTIN na