- Description
-
DPA d:screet 4061 Slim Lavalier
This white DPA d:screet 4061 Slim Microphone is a small low sensitivity Omni condencer microphone perfect for film, TV and theatre. The d:screet slim comes with a unique new Button-hole Mount providing you with even better performance when concealed under clothing. This cap is to be mounted on the mic head and has a small side entry pipe (diameter of 2mm) making it possible to have the sound enter through a button hole or the like directly to the diaphragm. At the same time, the cable runs perpendicular to this tube, making it easy to secure the slim mic head on the rear side of the clothes.
Features
The DPA d:screet™ Slim Miniature mic is available in four colours (B=black, F=beige, C=brown, W=white) and two sensitivities (60 – high sens and 61 – low sens) at the same prices as equivalent d:screet™ 4061 series miniature mics, with specifications to match. The Black mic will have a black mesh grid, the white, beige and brown mics will have metallic mesh grids.
Black Pictured
- Specifications
-
SPECIFICATIONS
- Directional pattern: Omnidirectional
- Principle of operation: Pressure
- Cartridge type: Pre-polarized condenser
- Frequency range: 20 Hz – 20 kHz
- Frequency range, ±2 dB: 20 Hz – 20 kHz, 3 dB soft boost at 5 – 20 kHz Button-hole mount: 20 Hz – 18 kHz, 5 dB soft boost at 5 – 18 kHz
- Sensitivity, nominal, ±3 dB at 1 kHz: 20 mV/Pa; -34 dB re. 1 V/Pa
- Equivalent noise level, A-weighted: Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
- Equivalent noise level, ITU-R BS.468-4: Typ. 35 dB (max. 38 dB)
- S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 71 dB(A)
- Total harmonic distortion (THD): < 1% up to 123 dB SPL peak, < 1% up to 120 dB SPL RMS sine
- Dynamic range: Typ. 100 dB
- Max. SPL, peak before clipping: 134 dB
- Output impedance: From MicroDot: 30 – 40 Ω. From DAD6001: 100 Ω
- Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
- Output balance principle: Signal balanced with DAD6001-BC XLR Adapter
- Common mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
- Power supply (for full performance): Min. 5 V to max. 50 V through DPA adapter for wireless systems, 48 V phantom power ±4 V with DAD6001 XLR adapter
- Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
- Connector: MicroDot
- Color: Black, beige, brown or white
- Weight: 8.5 g (0.3 oz) incl. Cable and MicroDot connector
- Cable length: 1.8 m (5.9 ft)
- Cable color: Black, beige or brown
- Cable diameter: 1.6 mm (0.06 in)
- Polarity: Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)
- Temperature range: -40°C to 45°C (-40°F to 113°F)
- Relative humidity (RH): Up to 90%
- Additional Information
-
Additional Information
Manufacturer DPA Microphones SKU SDPASCO61W00-S Model SCO61W00-S GTIN NA Single or Pair N/A