DPA d:fine Dual Ear Omni Headset - 3-Pin Lemo, TA4F Mini-XLR, Mini-jack
The DPA d:fine Dual Ear Omni Headset Mic is a headset microphone designed for active presentation and theatre settings. With an unobtrusive design and performing with pristine vocal clarity, the d:fine is a great solution for speech and vocal scenarios.
The mic has a high SPL handling, meaning it will deal with even the loudest of singers without any chance of distortion. It’s dual-ear lightweight design means the headset will stay attached during active performances or presentations and it's earhooks and boom rotate to align with either ear.
The mic is available in a variety of boom lengths, colours and connections. Please choose from the above.
This mic is also available with a MicroDot connection. Please see related products.
DPA d:fine Dual Ear Omni Headset Features
- Pristine audio quality
- Dual-ear mounting for active situations
- Adapts to all pro wireless systems
- Avaliable in Black and Beige
DPA d:fine Dual Ear Omni Headset SpecificationsDirectional characteristics: OmnidirectionalPrinciple of operation: PressureCartridge type: Pre-polarized condenserFrequency range: 20 Hz - 20 kHzFrequency range, ± 2 dB: 20 Hz - 20 kHz with 3 dB soft boost at 8 - 15 kHzSensitivity, nominal, ± 3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/PaEquivalent noise level, A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))Equivalent noise level, ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 68 dB(A)Total Harmonic Distortion (THD): <1 % up to 123 dB SPL peak; <1 % up to 120 dB SPL RMS sineDynamic range: Typ. 97 dBMax. SPL, peak before clipping: 144 dBOutput impedance: From MicroDot: 30 - 40 ohm. From DAD6001-BC: 100 ohm.Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC XLR adapterOutput balance principle: Signal balanced with DAD6001-BC XLR adapterCommon Mode Rejection Ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR adapterPower supply (for full performance): Min. 5 V to max. 50 V through DPA adapter for wireless systems. 48 V phantom power ± 4 V with DAD6001-BC XLR adapter.Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR adapter.Connector: 3-Pin Lemo, TA4F Mini-XLR, Mini-jackColor: Black, beigeWeight: Microphone boom: 0.8 g (0.03 oz). Earhook: 1.1 g (0.04 oz). Cable: 6.6 g (0.23 oz). Total: 8.5 g (0.30 oz).Microphone head size (h x w x d): 9.5 x 5.3 x 2.9 mm (0.37 x 0.21 x 0.11 in)Capsule diameter: 5.4 mm (0.2 in)Mic boom length: 110 mm (4.3 in)Cable length: 1.3 m (4.3 ft)Cable color: Black, beigeCable diameter: 1.6 mm (0.06 in)Polarity: +V at MicroDot pin for positive sound pressure (and pin 2 on DAD6001-BC XLR adapter)Electro Magnetic Compatibility (EMC): Fully compatibleTemperature range: -40 °C to 45 °C (-40 °F to 113 °F)Relative Humidity (RH): Up to 90%
- Additional Information
Manufacturer DPA Microphones SKU SDPAFIOB03-2 Model DPA d:fine Dual Ear Omni 3-Pin Lemo, TA4F Mini-XLR, Mini-jack GTIN N/A Single or Pair N/A