Skip to content
Free UK Mainland Delivery for Orders Over £99 - Need some advice? Talk to the team on 0151-236-7800
Free UK Mainland Delivery for Orders Over £99

DPA 4006 - d:dicate™ 4006ES Omni Mic, Side Cable, XLR

£1,764.00 inc. vat
£1,470.00 ex. vat
SKU SDPA4006ES
Please contact us for availability.

DPA 4006 - d:dicate™ 4006ES Omni Mic

The DPA d:dicate 4006 ES is a compact high quality microphone with an ultra-transparent preamp with active drive for impedance balancing. With side cable entry. This Omni Mic offers total transparency in any recording situation. It picks up incredible detail and depth of sound. The definition of its high-frequency characteristics across a wide range of instruments is impressive. It offers natural sound, high sensitivity, low noise-floor and linear frequency response from 10 to 20 kHz (±2 dB).

This mic is linear and true in character. It has earned its status as a worldwide recording standard and is the most popular mic in our d:dicate™ Recording Microphone Series. This highly sought after mic has forged its enviable reputation over the past quarter of a century by repeatedly exhibiting its total transparency in any recording situation.

A wide selection of accessories is available, including acoustic pressure equalizers, a nose cone and interchangeable protection grids. These accessories can acoustically transform the mic. By changing grids, it is possible to gain several unique frequency responses and directional characteristics. Furthermore, these accessories will not produce any phase shift, noise or distortion that would otherwise be introduced by an electrical filter. These accessories are available in the d:dicate™ Stereo Kits and d:mension™ and Surround Kits.

DPA 4006 ES Features

  • Acoustic authenticity
  • Linear throughout a large frequency bandwidth
  • Detailed and natural reproduction
  • High sensitivity and low noise floor
  • Excellent for concert halls and spot miking acoustical instruments
  • Modular flexibility

Specifications

  • Directional pattern: Omnidirectional
  • Principle of operation: Pressure
  • Cartridge type: Pre-polarized condenser
  • Frequency range: 10 Hz - 20 kHz
  • Frequency range, ± 2 dB: 20 Hz - 20 kHz
  • Sensitivity, nominal, ± 2 dB at 250 Hz: 40 mV/Pa; -28 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 15 dB(A) re. 20 μPa (max. 17 dB(A))
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 79 dB(A)
  • Total Harmonic Distortion (THD): < 1 % up to 132 dB SPL peak
  • Dynamic range: Typ. 117 dB
  • Max. SPL, peak before clipping: 132 dB
  • Output impedance: 100 Ω
  • Minimum load impedance: 2 kΩ
  • Cable drive capability: 100 m (328 ft)
  • Output balance principle: Impedance balancing
  • Common Mode Rejection Ratio (CMRR): > 40 dB
  • Power supply (for full specifications): 48 V Phantom power (±4 V)
  • Current consumption: 3.5 mA
  • Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
  • Colour: Matte black
  • Weight: 114g (4 oz)
  • Microphone diameter: 16-19 mm (0.6 - 0.75 in)
  • Capsule diameter: 16 mm (0.6 in)
  • Microphone length: 35 mm (1.38 in)
  • Output voltage, RMS: 2.2 V
  • Polarity: +V at Pin 2 for positive sound pressure
  • Temperature range: -40 to 45 °C (-40 to 113 °F)
  • Relative Humidity (RH): Up to 90%