My Cart Checkout Speak to an expert! Call us on 0151 236 7800 0151 236 7800
DPA 3541 Kit - Matched Pair 2 x 4041 Condenser Mic Kits - Used - Unavailable

DPA 3541 Kit - Matched Pair 2 x 4041 Condenser Mic Kits - Used - Unavailable

This product is currently unavailable
Contact us to discuss sourcing this or a similar product.

THIS PRODUCT IS NO LONGER AVAILABLE
Contact us to discuss sourcing this or a similar product.

This item includes two DPA 3541 Kits. Each kit includes a DPA 4041 condensor mic with valve and solid state preamp bodies, a HMA5000 preamp with foam wind shield, pop screen, shockmount, six-pin 130V mic cable, and hard case.


These used DPA 3541 Kits are in working condition and have been used by our hire department. There is little sign of wear and the kits have been regularly serviced by our in-house service department.
Description

DPA 3541 Kits - Matched Pair

This item includes two DPA 3541 Kits. Each kit includes a DPA 4041 condensor mic with valve and solid state preamp bodies, a HMA5000 preamp with foam wind shield, pop screen, shockmount, six-pin 130V mic cable, and hard case.

These used DPA 3541 Kits are in working condition and have been used by our hire department. There is little sign of wear and the kits have been regularly serviced by our in-house service department.

The Type 3541 is a complete microphone kit for all kinds of high quality soloist recordings. It is specially designed for the demanding requirements of everyday use in the recording studio where transparency, clarity and brightness are paramount. With the Type 3541, DPA Microphones introduce a completely new and highly versatile modular capsule and preamplifier system. The omnidirectional microphone capsule module MMC4041 features extremely high sensitivity and low self noise.

You will experience total transparency of this microphone no matter if you choose the high voltage solid state preamplifier module MMP4000-S or the phantom powered preamplifier module MMP4000-SP. All modules are packed in a convenient Samsonite carrying case with a shock mount, a pop-filter, windscreen and cable in addition to the Microphone Amplifier HMA4000. A highly cost effective solution for the discerning recording studio with focus on quality. This kit includes two Matched Pair's of 4041 Condenser Mics with Valve and Solid-State preamp bodies, HMA5000 high-voltage preamp kit, foam windshield, pop screen, shockmount, six-pin 130V mic cable and hard case

Specifications

SPECIFICATIONS

  • Principle of operation: Pressure
  • Cartridge type: 24mm (1in) condenser w. stainless steel diaphragm
  • Frequency range: 10Hz - 20kHz -2dB with 4-6dB soft boost at 8 kHz
  • Directional characteristics: Omnidirectional
  • Equivalent noise level A-weighted: Tube preamp Max. 10dB(A) re. 20 Pa
  • Sensitivity: Tube preamp: Nominally 85 mV/Pa -2dB
  • Equiv. noise level ITU-R BS.468-4: Tube preamplifier: Max. 22dB
  • Total harmonic distortion (THD): 120dB SPL peak ( *Preamplifier frequency range:20Hz to 50kHz (-0.2dB)
  • Preamplifier output impedance: Matches HMA4000 input
  • Preamplifier cable drive capability: With HMA4000:Up to 300m (984ft)
  • Microphone length: 170mm (6.69in)
  • Maximum sound pressure level: 144dB SPL peak before clipping
  • Weight: 190g (6.7oz)
Additional Information

Additional Information

Manufacturer DPA Microphones
SKU SDPA3541PAIRC02
Model DPA3541
GTIN NA
Single or Pair N/A