My Cart Checkout Call us on 0151 236 7800 0151 236 7800

Patchbays

Set Ascending Direction

1-10 of 29

Page:
  1. 1
  2. 2
  3. 3
  1. Signex Isopatch Bantam CPT96T Patchbay

    Signex Isopatch Bantam Patchbay Rear D Sub Silver Contacts

    The Signex Isopatch Bantam CPT96T Patchbay features 25-way rear D-sub connectors with silver contacts. This patchbay is influenced on the same design that has made the Isopatch so favoured.
    £306.54 (inc. vat)
    £255.45 (ex. vat)

  2. Signex CPX16FJ

    Signex CPX16FJ - XLR Panel, female, rear Jacks

    The Signex CPX16FJ is a single row of 16 female XLR receptacles that can be fitted easily into a standard rack unit. This hardware also supplies slide-in strips so you can keep your receptacles organised without tape and/or stickers, keeping your stu
    £119.99 (inc. vat)
    £99.99 (ex. vat)

  3. Signex LBK01

    Signex LBK01 1U Lacing Bar Kit for CP series panels

    The Signex LBK01 is a lancing bar that helps anchor the rear connection loom and independently supporting is from the rear connector or solder joints. This lancing bar can be used for any of the connector panels in the CS series.
    £24.00 (inc. vat)
    £20.00 (ex. vat)

  4. Signex CPX16MJ

    Signex CPX16MJ - XLR Panel, male, rear Jacks

    The Signex CPX16MJ is a single row of 16 male XLR receptacles that can be fitted easily into a standard rack unit. This hardware also supplies slide-in strips so you can keep your receptacles organised without tape and/or stickers, keeping your studi
    £101.99 (inc. vat)
    £84.99 (ex. vat)

  5. Signex Isopatch Bantam CPT96D25P Patchbay

    Signex Isopatch Bantam Patchbay Rear D Sub Palladium Contacts

    The Signex Isopatch Bantam CPT96D25P Patchbay with palladium contacts uses 25 way rear D-sub connectors. This patchbay is designed on the same basis that has made the Isopatch so preferable.
    £599.99 (inc. vat)
    £499.99 (ex. vat)

  6. Neutrik NYS-SPP-L1

    Neutrik/Rean NYS-SPP-L 48 way 1/4 inch balanced jack patchbay

    The Neutrik/Rean NYS-SPP-L is a economical and remarkable sleek designed 1/4“ modular Patch Panel for 19“ rack mount (19“ x 1U) with a reinforced metal housing. Each of it‘s 48 PCB wired balanced channels (24 front pairs and corresponding 24
    £61.75 (inc. vat)
    £51.46 (ex. vat)

  7. Neutrik Re-an RPM-48S A Gauge 48 Way Stereo Patchbay

    Neutrik Re-an RPM-48S A Gauge 48 Way Stereo Patchbay

    Neutrik Re-an RPM-48S A Gauge 48 Way Stereo Patchbay
    £107.99 (inc. vat)
    £89.99 (ex. vat)

  8. Neutrik MA96-1O

    Neutrik MA96-1O 96-Way Bantam Patchbay - Black Front Panel

    The Neutrik MA96-1O is a 96 way Bantam Patch Panel with a black front panel, grouped 12 x 8, and extra rugged jack sockets that allow customised normalling.
    £354.00 (inc. vat)
    £295.00 (ex. vat)

  9. Samson S-Patch Plus

    Samson S-Patch Plus 48 Point Patch Bay

    The Samson S Patch Plus is a 48-way patch bay that features high quality miniature toggle switches allowing each channel to be configured for either Normalled, Half-Normalled or Thru operation. The S-Patch Plus will provide reliable operation while m
    £126.06 (inc. vat)
    £105.05 (ex. vat)

  10. Mosses and Mitchell 80 Point Bantam Patchbay Pre-Wired to EDAC

    Mosses and Mitchell 80 Point Bantam Patchbay Pre-Wired to EDAC - Used

    This Mosses and Mitchell patchbay features 96 Bantam points over 2 rows wired to 2 x 120Pin Male EDAC on Rear (1 for each row). Top Row 1-36 Normalised to Bottom Row 1-36, final bank of 4 on each row are wired parallel for splitting/duplicating signa
    £180.00 (inc. vat)
    £150.00 (ex. vat)

Set Ascending Direction

1-10 of 29

Page:
  1. 1
  2. 2
  3. 3