Barefoot Sound MicroMain27 Gen2 Studio Monitors - Pair
The Barefoot Sound MicroMain27's are unique, extremely accurate studio reference monitors featuring 5 driver's that deliver a flat and true frequency response of 30hz-45khz with astonishing detail and transient response. Perhaps the first thing people notice about the Barefoot MicroMain27's is that it features a 10" sub woofer on either side of the speaker cabinet. The MicroMain27 also has 3 front facing drivers which are two 5.25" woofers and one 1" ring radiator high frequency tweeter.
The Barefoot Sound MicroMain27's are reference speakers that you can rely on and a sound that will translate excellently to a whole range of playback systems.
Since the launch of the Gen2 MicroMain27's they have included Barefoot's MEME™ Technology which accurately emulates other popular studio monitors and has a high fi setting. The MEME™ Technology firstly models the extremely popular Yamaha NS10m's that are found in nearly every big studio due to their brutally honest and revealing sound and secondly it emulates mix cubes which lots of engineers use to focus in on certain areas of their mix.
Made from only the highest quality components, using a truly unique design and incorporating the intelligent MEME system the Barefood Sound MicroMain27 is a fantastic choice for your main nearfield monitor system.
- Type: 3.5-way active monitor with MEME™ Technology
- Controls: Analog/AES3 input select, AES3 L/R channels select, Input level stepped attenuator, Subwoofer level, Emulation voice select
- Input Impedance: 50k Ohm
- Frequency Response: 30Hz – 45kHz (±3dB),40Hz – 40kHz (±1dB)
- Bass Response: -3 dB @ 30Hz, Q = 0.707Slope = 12 dB/octave
- Crossover Frequencies: 100 / 600 / 3000 Hz
- Tweeter: 1″ ring radiator, Advanced geometry motor, Rear waveguide chamber Amplifier: 250W Hypex
- Midbass 1: 5.25″ poly/paper cone, Advanced geometry neodymium motor, +/- 5 mm linear excursion Amplifier: 250W Hypex
- Midbass 2: 5.25″ poly/paper cone, Advanced geometry neodymium motor, +/- 5 mm linear excursion Amplifier: 250W Hypex
- Subwoofers: 2 x 10″ aluminum cone with high linearity motor, +/- 13 mm linear excursion Amplifier: 500W Hypex
- AC Power Input: Nominal 115 VAC or 230 VAC selectable
- Power Consumption: Idle: 30W, Maximum: 650W
- Weight: Speaker: 68 lbs each (31 kg)
- Shipping: 80 lbs each (36 kg)
- Dimensions HxWxD: 20.5 x 10.5 x 17.4 inches (521 x 267 x 442 mm)
- Additional Information
Manufacturer Barefoot Sound SKU SBARMM27G2 Model MicroMain27 GTIN NA