Wes Audio LC-EQP - Pultec-Style Mono EQ
£1,030.00 ex. vat
Wes Audio LC-EQP
The WesAudio LC-EQP is a single channel passive EQ with a built in tube amplifying stage. The input system for this equaliser is based on a Carnhill liner transformer, the input impedance is > 1.5 kohm making it higher than other outboard EQs of the same class. The EQ itself is made up of a system containing coils, resistors and capacitors. With additional bands for the low and high sections of the spectrum this EQ give you more control over your mix.
The equaliser output is symmetrical. A Carnhill transformer is responsible for output symmetrization, which provides a low output impedance. The anode and heater voltage are stabilised. WesAudio LC-EQP is powered by alternating current 230V / 115V, which can be selected by a voltage selector. The casing is 2U rack made of 1.5mm stainless steel whereas the aluminium front panel is 4mm. LOW section has separate boost regulations and frequency cut offering six bands.
Specifications
- Gain: 0dB (+/- 0.5dB)
- Input impedance: >1.5kohm
- Output impedance: 150ohm
- Max. Output level: +22dBu (0.8% THD)
- Frequency response: 5Hz – 65kHz (-3dB)
- SNR ratio: 90dB
- Low Boost: max +18dB
- Low cut: max -18dB
- High Boost: max +20dB
- High cut: max -18dB
- Low boost: 20, 30, 60, 100, 120, 250 Hz
- Low cut: 20, 30, 60, 100, 120, 250 Hz
- High Boost: 1, 1.5, 2, 3, 4, 5, 6, 8, 10, 12, 16, 20 kHz
- High Cut: 2, 4, 6, 12, 16, 20 kHz
- AC mains: 115(60Hz) / 230V(50Hz)
- Transformer: balanced output and input (XLR Neutrik)
- Case Rack: 2U
- Dimensions : 88 x 483 x 237 mm
- Weight: 7 kg