TSP DB1 Demountable Acoustic Booth
The TSP DB1 is an acoustically treated demountable acoustic booth that can be taken down and be ready to be relocated in less than 1 hour. Inside the DB1 are three removable acoustic panels, a removable worktop and a fan assisted fresh air feed.
Internally, the DB1 is 2039mm high with the sides being 1188mm wide. The DB1 can be used for both mixing and recording with an extremely low reverberation response of just of 0.06s to 0.17s (T20) from 100Hz to 10kHz.
Isolation wise, the DB1 achieves a DnTw42 specification which when installed into a quiet, but not necessarily fully sound proofed space, will give great isolation, although it is not designed for very high isolation of loud sources such as live drums etc...
The DB1 is powered by attaching the three flex cables into standard 13amp sockets. the light are turned on by a motion sensor and the fan has a speed control and supplies air via a high performance rooftop attenuator.
The dB1 is designed to be an affordable solution for home studios, teaching facilities, voice-over studios, and Post Production suites alike.
View the images for the choice of fabric colours available .
*Shipping for TSP acoustic products must be calculated on a per order basis due to volumetric weight of product. Contact us before hand for a quote, or we will contact you on receipt of order.
TSP DB1 Specifications
- Total Booth Weight: 596kg
- External Height: 2200mm excl. fan unit
- External Height: 2495mm inc. fan unit
- Internal Height: 2039mm
- External Width/Depth: 1350mm
- Internal Width/Depth: 1188mm (excl. panels)
- Power Requirements: 230v/50hZ @ < 1A
- Lighting: 4 x 3W LED downlighters
- Air System: 28 litres/sec @ 50 fan speed