My Cart Checkout Speak to an expert! Call us on 0151 236 7800 0151 236 7800

SPL Phonitor 2 - 120V Rail Headphone Monitoring Amplifier

SPL Phonitor 2 - 120V Rail Headphone Monitoring Amplifier
£1,344.00 (inc. vat)
£1,120.00 (ex. vat)

Brand: SPL

Usually Ships in 1 - 3 Days

The SPL Phonitor 2 is a headphone monitoring amplifier that features Phonitor Matrix, this provides speaker-equivalent listening on headphones so you get an accurate representation. The Phonitor 2 Headphone Monitors builds on the success of its predecessor, delivering exceptional audio fidelity and performance, ideal for mixing and mastering applications. The SPL Phonitor 2 accommodates all headphones with impedances greater than 1000Ohms (or 40 Ohms for balanced headphones). The new and improved design makes the Phonitor the ultimate monitor controller and preamp for three different sources.
Interested in hiring this product?
Send an enquiry now.
OR
Description

SPL Phonitor 2

The SPL Phonitor 2 is a headphone monitoring amplifier that features Phonitor Matrix, this provides speaker-equivalent listening on headphones so you get an accurate representation. The Phonitor 2 Headphone Monitors builds on the success of its predecessor, delivering exceptional audio fidelity and performance, ideal for mixing and mastering applications. The SPL Phonitor 2 accommodates all headphones with impedances greater than 1000Ohms (or 40 Ohms for balanced headphones). The new and improved design makes the Phonitor the ultimate monitor controller and preamp for three different sources.

The Phonitor 2 remains first and foremost a headphone preamp, which is easy to identify given the elaborate loudspeaker simulation for headphones. It works seamlessly with low-impedance headphones with load impedances as low as 10 Ohm (40 Ohm with balanced headphones).

Features

  • 120V Rail headphone amplifier, preamplifier and monitor controller
  • Exceptional sound reproduction
  • Provides monitoring for up to three sources
  • For all headphones with impedances >10Ohms (>40Ohms for balanced headphones)*
  • Innovative Phonitor Matrix - speaker-equivalent listening on headphones
  • Laterality control - super-fine balance control
  • Solo L/R, Polarity ø L/R, Mono/Stereo
  • Volume remotely adjustable (learns any IR remote control)
  • Central monitoring unit in professional environments with all classic features like phase reverse, solo, mono
  • Re-Amping (for example, level boost after analog master processing)
  • Headphone amplifier for all headphone systems and impedances
  • Loudspeaker simulation with headphones
  • Monitoring alternative in studios and mobile units
  • Adjustment of headphone playback to match familiar monitor speakers
  • Mobile reproduction of usual monitoring conditions
Specifications

SPECIFICATIONS

  • XLR Input
    • Inputs: Neutrik XLR, balanced, Pin 2 = (+)
    • Impedance: ca. 20 kohms
    • CMR: -82 dBu (at 1 kHz)
    • Max. Input Level: +32.5 dBu
  • RCA Input
    • Inputs: RCA, unbalanced (single ended)
    • Impedance: ca. 10 kohms
    • Max. Input Level: +32.5 dBu
  • Headphone Output
    • Inputs: 6.35 mm TRS connector
    • Pin Wiring: Tip = Left, Ring = Right, Sleeve = GND
    • Impedance: 0.18 Ohm
    • Damping Factor: 180 @ 40 Ohm
    • Frequency Range: 10 Hz to 300 kHz ( -3 dB)
    • Crosstalk at 1 kHz: -90 dB
    • THD&N: 0.00091 (at 0 dBu, 1 kHz, 100 kohms load)
    • Noise (A-weighted): -103 dBu
    • Dynamic Range: 135.5 dB
  • Max. Output Power (at +30 dBu at 1 kHz) Impedances:
    • 2 x 1 W at 600 Ohm impedance
    • 2 x 2 W at 300 Ohm impedance
    • 2x 3.7 W at 120 Ohm impedance
    • 2x 2.9 W at 47 Ohm impedance
    • 2x 2.7 W at 32 Ohm impedance
  • Monitor/Line Outputs
    • Outputs: Neutrik XLR, balanced, Pin 2 = (+)
    • Frequency Range: 4 Hz to 300 kHz (-3 dB)
    • Crosstalk at 1 kHz: -106 dB
    • THD&N: 0.00085 (at 0 dBu, 1kHz, 100 kohms load)
    • Noise: (A-weighted) -103.8 dB
    • Dynamic Range: 136.2 dB
  • Power Supply
    • Mains Voltage (switchable): 230 V AC / 50 Hz or 115 V AC / 60 Hz
    • Fuses: 230 V: T 630 mA; 115 V: T 1 A
    • Power Consumption: max 24 VA
  • Dimensions
    • Dimensions (WxHxD): 278 mm x 100 mm x 335mm
    • Weight: 4.3 kg; 9.5 lbs (unit only)
Additional Information

Additional Information

Manufacturer SPL
SKU SSLPPHONITOR2
Model Phonitor 2
GTIN 04260149321305