T: 0151 707 4545

Sound Devices MM-1 Single Channel Battery powered Mic Pre

£606.00 £505.00 (ex. vat)

Sound Devices MM-1

  • Sound Devices MM-1
  • Sound Devices MM-1 Front
  • Sound Devices MM-1 Rear

Sound Devices MM-1 Single Channel Battery Powered Mic Pre

The Sound Devices MM-1 is a highly versatile and portable single-channel microphone preamplifier with a powerful headphone monitoring function. Proven in mission-critical applications, the high-performance microphone preamplifier uses a transformer-balanced input and output with a bipolar ±15 volt power supply to produce low-noise, low-distortion gain at all switch positions. It features an "unclippable" dual-stage limiter and two-position high-pass filter. Flexible microphone powering provides phantom power at 48 volts or 12 volts and 12-volt T-power. It is powered from two-AA batteries or external 5-18 VDC.

The MM-1 is at home in high-definition television production, corporate/industrial environments, radio/television announce booths, and music production. Its headphone monitor is an advantage in applications where communications channels or mix-minus feeds need to be monitored in headphones. The user can monitor both microphone audio and external audio sources in headphones with level control.

The MM-1 is designed to be durable. Its aluminum chassis, oversized end panels, machined knobs, and panel mounted connectors assure reliable mechanical operation.

Sound Devices MP-1 Features

  • Maximum of 66 dB of gain, in eleven discrete steps
  • Dynamic range exceeding 120 dB
  • 10 Hz to 50 kHz audio bandwidth
  • High immunity to RF interference
  • High current line output driver
  • Transformer-balanced input and output
  • Extended range peak limiter via dual opto-isolators makes preamplifier virtually "unclippable"
  • Selectable 48-volt / 12-volt phantom power or 12-volt “T" power
  • High-pass filter @ 80 or 160 Hz, 6 dB per octave
  • Headphone monitoring of microphone audio, monitor audio, or a mix of both
  • Monitor input accepts mono, balanced or unbalanced line-level inputs on 1/4-inch tip-ring-sleeve connector
  • Separate level control of Monitor gain and overall headphone gain
  • Split ear function via DIP switches
  • Internal battery power (two-AA)
  • Excellent battery life with alkaline and NiMH rechargeable batteries
  • External 5-17 VDC powering (plug included)
  • High-strength aluminum chassis with durable belt clip

Panel Views

Front Panel

  • Switched gain for microphone preamp,
  • Two-position high-pass filter,
  • Switched peak limiter,
  • LED for limiter or peak indication,
  • Variable level control for monitor signal,
  • Headphone volume control,
  • Headphone output on 1/4-inch connector,
  • Power LED shows green on power and red when batteries are low,
  • Power switch selects batteries or external DC,
  • Protective metal end rails and belt clip.

Back Panel

  • Transformer-balanced microphone input,
  • Transformer-balanced line level output,
  • Monitor source input on TRS 1/4-inch, balanced connector,
  • 48 V or 12 V phantom,
  • Phantom, dynamic, or T power,
  • Battery compartment, two AA,
  • External 5 - 17 V DC power.

Sound Devices MM-1 Specifications

  • Gain: (Mic - Line) 0 dB to 66 dB input to output, switch selectable
  • Frequency Response: (Mic - Line) 20 Hz –20 kHz, +0.1, -0.5 dB, -1 dB at 50 kHz (relative to 1 kHz level with 150 ohm source)
  • Equivalent Input Noise: (Mic) -126 dBu (-128 dBV) maximum (150 ohm source, flat weighting, 22 Hz – 22 kHz bandwidth gain setting 36 dB or greater)
  • Dynamic Range: (Mic to Line) 122 dB minimum at the +18 dB gain setting
  • THD + Noise: 0.05% maximum (from 50 Hz – 22 kHz @ +4 dBu output level, 22 Hz – 22 kHz filter bandwidth, +46 dB gain setting
  • Gain Accuracy: (Mic - Line) +0.6, -0.1 dB with reference to front panel gain markings (150 ohm source, 100 k load impedances)
  • Output Clipping Level: (Line) +22 dBu minimum with 100k ohm load+20 dBu minimum with 600 ohm load
  • Input Clipping Level: (Mic) +4 dBu minimum at the 0 or +18 dB gain setting
  • Common Mode Rejection Ratio: 100 dB minimum at 80 Hz60 dB minimum at 10 kHz
  • Weight: 0.7 kg (1.1 lbs)
  • Dimensions: 49 mm x 95 mm x 166 mm, 1.95" x 3.75" x 6.55" (h x w x d)
Manufacturer Sound Devices
Model Sound Devices MM-1
Sound Devices
Sound Devices
Sound Devices MM-1
Contact Us

Studiocare Professional Audio Ltd.

Unit 2, 56 Evans Road


L24 9PB

+44 (0) 151 707 4545
+44 (0) 845 345 8910

Opening Hours
Mon - Fri: 9:30 - 5:30
Sat - Sun: Closed

How To Find Us
Terms & Conditions
Returns Form
Repair Request
Studiocare on FacebookStudiocare on TwitterStudiocare on Google+” width=Studiocare on YoutubeStudiocare on Pintrest

© Copyright Studiocare Professional Audio Ltd. 2016