My Cart Checkout Speak to an expert! Call us on 0151 236 7800 0151 236 7800

Sony UWP-D11 with DPA D:Fine 66 Headset Mic Bundle

Sony UWP-D11 with DPA D:Fine 66 Headset Mic Bundle
£1,140.00 (inc. vat)
£950.00 (ex. vat)

Brand: Sony

Usually Ships in 1 - 3 Days

This Sony and DPA bundle is made up of the Sony UWP-D11 belt-pack wireless transmitter, receiver and DPA D:Fine 66 headset microphone. The UWP-D11 belt-pack wireless microphone package offers the sound quality of digital audio processing combined with the reliability of analogue FM modulation, while the d:fine™ 66 Headset Microphone combines the legendary sound of the 4066 Omnidirectional Capsule with the lightweight and flexible d:fine Headset system.
Interested in hiring this product?
Send an enquiry now.
OR
Description

Sony UWP-D11 with DPA D:Fine 66 Headset Mic

This Sony and DPA bundle is made up of the Sony UWP-D11 belt-pack wireless transmitter, receiver and DPA D:Fine 66 headset microphone. The UWP-D11 belt-pack wireless microphone package offers the sound quality of digital audio processing combined with the reliability of analogue FM modulation, while the d:fine™ 66 Headset Microphone combines the legendary sound of the 4066 Omnidirectional Capsule with the lightweight and flexible d:fine™ Headset system. This condenser mic is easy and fast to adjust and it offers clean and transparent sound quality with lots of headroom.

Features

The package includes the UTX-B03 belt-pack transmitter and URX-P03 portable receiver. Also, included is a high quality omni-directional lavalier microphone and a range of accessories including windscreen, microphone holder clip, belt-clip and shoe-mount adaptor.The UWP-D11 package offers wide frequency coverage with up to 72 MHz bandwidth (depending on region) across a wide range of channels, with a choice of models to choose from.

Like all of the microphones in the range, the d:fine™ 66 Headset Microphone offers accurate, natural voice intelligibility and very high SPL capabilities. Users can both speak and sing into the mic with no hint of distortion. The microphone capsule is also optimized for low distortion as well as humidity resistance.

Specifications

SPECIFICATIONS

URX-P03

  • Oscillator Type: Crystal-controlled PLL Synthesizer
  • Reception Type: Space diversity
  • Antenna Type: 1/4 wave length wire
  • Frequency Response: 23Hz to 18kHz (typical)
  • Signal-to-Noise Ratio: 96dB (max deviation, A-weighted)
  • Distortion (T.H.D): 0.9% or less (-60dBV, 1kHz input)
  • Audio Delay: Approx. 0.35 msec
  • Analog Output: 3-pole mini jack, unbalanced
  • Analog Output Level: -60dBV (at ±5kHz deviation)
  • Analog Output Adjust Range: -12dB - +12dB (3dB step)
  • Headphone Output: φ3.5 mm ( 5/32 inch) stereo mini jack
  • Headphone Output Level: Max. 10mW (at 16ohm load)
  • Pilot Tone Signal: 32 kHz/ 32.382 kHz/ 32.768 kHz
  • Display: LCD
  • Dimensions: 63 x 82 x 23.8mm (excluding the anntenas) (W x H x D)

UTX-B03

  • Oscillator Type: Crystal-controlled PLL Synthesizer
  • Antenna Type: 1/4 wave length wire
  • Type of Emission: F3E
  • Capsule Type: Electret condenser
  • Directivity: Omni-directional
  • Input Connector: 3-pole locking mini jack
  • Reference Input Level:
    • MIC: -60 dBV (at 0-dB attenuator level)
    • LINE: +4 dBu
  • Audio Attenuator Adjustment Range: 0 dB to 21 dB (in 3-dB steps): Mic input
  • Frequency Response: Americas, Europe, UAE, South Africa, Australia, Malaysia, Vietnam, New Zealand: Transmission 23 Hz to 18 kHz (typical)
  • Frequency Response: China, Thailand, Taiwan, Singapore, South Korea: Transmission 23 Hz to 18 kHz (typical)
  • Frequency Response: Japan: Transmission 40 Hz to 15 kHz (typical)
  • Signal-to-Noise Ratio: 96dB (max deviation, A-weighted)
  • Audio Delay: Approx. 0.35 msec
  • Pilot Tone Signal: 32 kHz/ 32.382 kHz/ 32.768 kHz
  • Display: LCD
  • Dimensions: 63 x 82 x 20 mm (excluding the anntenas) (W x H x D)

D:fine 66

  • Directional pattern: Omnidirectional
  • Principle of operation: Pressure
  • Cartridge type: Pre-polarized condenser
  • Frequency range: 20 Hz - 20 kHz
  • Frequency range, ±2 dB: Soft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz. High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz
  • Sensitivity, nominal, ±3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
  • Equivalent noise level, ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 68 dB(A)
  • Total harmonic distortion (THD): < 1% THD up to 123 dB SPL peak, < 1% THD up to 120 dB SPL RMS sine
  • Dynamic range: Typ. 97 dB
  • Max. SPL, peak before clipping: 144 dB
  • Output impedance: From MicroDot: 30 - 40 Ω. From DAD6001: 100 Ω
  • Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
  • Output balance principle: Signal balanced with DAD6001-BC XLR Adapter
  • Common mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
  • Power supply (for full performance): Min. 5 V to max. 50 V through DPA adapter for wireless systems
  • Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
  • Connector: MicroDot
  • Color: Beige
  • Weight: Single Ear: 10 g (0.35 oz)
  • Microphone diameter: 5.4 mm (0.21 in)
  • Microphone length: 12.7 mm (0.5 in)
  • Cable length: 1.25 m (4.1 ft)
  • Cable color: beige
  • Cable diameter: 1.6 mm (0.06 in)
  • Polarity: Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)
  • Temperature range: -40°C to 45°C (-40°F to 113°F)
  • Relative humidity (RH): Up to 90%
Additional Information

Additional Information

Manufacturer Sony
SKU SSONUWPD1166
Model UWP-D11/66
GTIN NA