Currency:
T: 0151 707 4545

Rode Classic II Valve Studio Condenser Microphone with 9 Patterns

THIS PRODUCT IS NO LONGER AVAILABLE.
Contact us to discuss sourcing this or similar products.
0151 236 7800 - sales@studiocare.com

£1,569.00 £1,307.50 (ex. vat)


Rode Classic II Valve Studio Condenser  Microphone with 9 Patterns

  • Rode Classic II Valve Studio Condenser  Microphone with 9 Patterns

From its custom designed Jensen transformer to the dual pressure gradient transducer this valve microphone is a Classic. Machined from solid brass, hand polished,glass bead blasted and coated in satin nickel, this is a microphone with Class A valve circuitry that gives unmatchable warmth, clarity and sensitivity when critical vocal and instrument recording is required.

The Classic II retains many of the qualities of the original, while offering a number of improvements. The new microphone provides greatly enhanced sonic performance, thanks to its dual edge-terminated large diaphragm design. Edge-termination allows the diaphragm to move unrestricted by a center wire, resulting in fuller low end response. Self-noise has been significantly reduced, thanks to re-designed internal circuitry. The new birdcage shock-mount provides superior mechanical noise suppression, and the new stand mount design offers greater stability and security. Overall reliability has been improved through a complete redesign of the mechanical cable connections and the double-shielded, oxygen-free copper multicore cable.

Rode Classic II Features

  • Class A valve circuitry
  • Dedicated power supply
  • 6072 twin triode
  • edge-terminated 1inch gold sputtered diaphragm
  • Custom designed Jensen transformer
  • -10dB and -20dB Pads (switched from power supply)
  • 2 position high pass filter (switched from power supply)
  • 9 polar patterns (switched from power supply)
  • Double shielded oxygen-free copper multicore cable with custom designed heavy duty plugs and sockets
  • Supplied complete with Power Supply, 10m (30ft) Cable, SM2, Shock Mount Suspension, M2 Stand Mount 3/8 inch 5/8 inch Thread Adaptor,
  • Custom Aluminium Flight Case

Rode Classic II Specifications

  • Capsule: Externally polarised dual diaphragm 25mm (1 inch) condenser
  • Active Electronics: Thermionic impedance converter
  • Pickup Pattern: Switchable Omnidirectional / Cardioid / Figure-8 in nine steps
  • Frequency response: 20 Hz-20 kHz
  • High Pass Filter: Switchable - flat, -15dB @ 20Hz, -21dB @ 20Hz. Cascaded first-order filters
  • Output Impedance: 200 Ohms
  • Sensitivity: -37dB re 1volt/pascal (14mV @ 94dB SPL) +/-2dB
  • Equivalent Noise: <18 dBA (A weighted per IEC268-15)
  • Maximum Output: + 2dBu (@ 1% THD into 1K)
  • Dynamic Range: >113dB (per IEC268-15)
  • Maximum SPL: 131dB SPL (@ 1% THD into 1K)
  • Signal/Noise Ratio: >76dB (per IEC268-15)
  • Power Requirements: Dedicated Power Supply (110 ~ 120V/220 ~ 240V, 50/60 Hz)
  • Packed Weight: 8.7kg (Mic only 1.044kg)
Manufacturer Rode
SKU SRODCLASSICII
Model SRODCLASSICII
GTIN No
Rode
Rode
SRODCLASSICII
Contact Us

Studiocare Professional Audio Ltd.

Unit 2, 56 Evans Road


Liverpool

L24 9PB


Phone
+44 (0) 151 707 4545
+44 (0) 845 345 8910


Opening Hours
Mon - Fri: 9:30 - 5:30
Sat - Sun: Closed
Help

Contact
How To Find Us
Terms & Conditions
Shipping
Newsletter
Returns Form
Repair Request
Studiocare on FacebookStudiocare on TwitterStudiocare on Google+” width=Studiocare on YoutubeStudiocare on Pintrest

Studiocare
© Copyright Studiocare Professional Audio Ltd. 2016