Rane HC 6 S - 6 Channel Headphone Amp
The Rane HC6S is a six stereo channel headphone amplifier. The HC6S provides Master stereo Inputs which can be used to drive any or all of the 6 stereo headphone amplifiers. A Mono switch on the front panel drives both channels of all 6 amplifiers from a common mono source.
Six individual unbalanced stereo Inputs are available to drive any individual amplifier from a separate stereo source. These Inputs can be converted to mono balanced Inputs through internal jumpers if required. Outputs for all six channels are provided on the front panel and on the rear panel so that headphones may be connected on either side. Two pairs of headphones may be driven from each channel, one pair connected to the front and one to the rear.
The HC6S is capable of delivering up to 500 milliwatts into headphones with rated impedances between 32-600 Ω. The precise amount of power depends on the exact impedance of the headphone in use and the number of headphones connected to the unit. Under most conditions, the HC6S produces sound pressure levels in excess of 120 dB, more than adequate for most listeners.
Rane HC6S Features
- 6 independent stereo headphone amplifiers
- Master balanced or unbalanced stereo inputs with Master Level
- Six unbalanced stereo Inputs can drive each amplifier
- Front and rear Output jacks
- Six Output Level controls
- Stereo / Mono switch