My Cart Checkout Speak to an expert! Call us on 0151 236 7800 0151 236 7800

QSC K10 - 1000W 10" Active Portable Loudspeaker

QSC K10 - 1000W 10" Active Portable Loudspeaker
£666.00 (inc. vat)
£555.00 (ex. vat)

Brand: QSC

Usually Ships in 1 - 3 Days

The QSC K10 Active Loudspeaker is made from premium-grade materials, advanced construction processes and multiple mounting and suspension options allow for a wide range of live and installed applications.
Interested in hiring this product?
Send an enquiry now.
OR
Description

QSC K10

The QSC K10 Active Loudspeaker is made from premium-grade materials, advanced construction processes and multiple mounting and suspension options allow for a wide range of live and installed applications. Combo XLR and 1/4" TRS inputs accept both Mic and Line Level input while a set of RCA phono inputs allow additional connectivity to portable MP3 players, CD players and line-level mixers. Up to three audio sources can be mixed internally and summed to a balanced output for "daisy-chaining" of multiple units. Separate direct outputs are also provided on each channel for additional output flexibility.

On-board switches provide preset EQ settings. The HF setting (fullrange models) can be set to VOCAL BOOST for additional presence in the critical mid-frequency area or FLAT for accurate reproduction of the incoming signal. The LF switch can be set to NORM, DEEP for additional bass extension, or EXT SUB (fullrange models) for use with an external subwoofer. The rear panel LED switch can be set to POWER, illuminating the front-mounted LED when the unit is powered on, OFF for applications where it is not desirable to illuminate the front LED, or LIMIT which indicates to the system operator that the clip limiter circuit has been engaged during operation.

QSC K 10 Features

  • 10” Woofer; 1.75” diaphragm compression driver
  • 90° Nominal coverage angle
  • Maximum SPL 129 dB peak
  • 1000-watt continuous Class D power modules in all models
  • Onboard mixer with two combo XLR and ¼” inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced output
  • Extensive DSP enhances system performance
    • DMT™ (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.Intrinsic Correction™, first featured in our high-end line-array products maps 65–75 spatially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat band pass target. The result is a speaker that behaves equally well across the entire sound field.
    • DEEP™ and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.GuardRail™ protection protects both the amplifier module and your performance from unnatural and destructive clipping.
  • Attractive and professional appearance
  • Rugged ABS enclosures
  • Functions as a monitor wedge
  • 16-gauge powder coated steel grille
  • Comfortable ergonomic handles
  • 35 mm pole sockets with Tilt-Direct™
  • M10 rigging points
  • Eyebolt and yoke mount accessories available

Specifications

  • Configuration: Multipurpose 2-way
  • Transducers
    • Low-frequency: 10" cone transducer
    • High-frequency: 1.75" diaphragm compression driver
  • Frequency Response (-6 dB): 60 Hz to 18 kHz
  • Frequency Range (-10 dB): 56 Hz to 20 kHz
  • Nominal Coverage (-6 dB): 90° conical
  • Maximum SPL: 129 dB peak

Amplifiers

  • Power Output:
    • 1000 W continuous Class D (500 W LF, 500 W HF) 
    • 2000 W peak
  • Input Impedance:
    • XLR / ¼": 40 kΩ balanced / 20 kΩ unbalanced
    • XLR / ¼" MIC mode: 2260Ω balanced
    • RCA: 10 kΩ
  • Controls: Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)
  • Indicators: Power, Signal A, Signal B, Standby, Limit, Mic
  • Connectors: Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector
  • Cooling: On demand, 50 mm variable speed fan
  • Amplifier Protection: Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
  • Transducer Protection: Thermal limiting, excursion limiting
  • AC Power Input: Universal power supply 100–240 VAC, 50 to 60 Hz
  • AC Power Consumption (1/8 of full power): 230 VAC, 1.13 A

Enclosure

  • Material: Impact resistant ABS
  • Finish: Black paint
  • Grille: Rugged powder-coated steel
  • Dimensions (HWD):
    • 20.4" × 12.6" × 11.8"
    • 519 mm × 320 mm × 300 mm
  • Weight (Net): 32 lb / 14.5 kg
Additional Information

Additional Information

Manufacturer QSC
SKU SQSCK10
Model K10-BK-230
GTIN 0684284060303