My Cart Checkout Speak to an expert! Call us on 0151 236 7800 0151 236 7800

Neutrik XIRIUM PRO RX Digital DANTE Output Module (NXP-RM-DANTE-E)

Neutrik XIRIUM PRO RX Digital DANTE Output Module (NXP-RM-DANTE-E)
£384.00 (inc. vat)
£320.00 (ex. vat)

Brand: Neutrik

Usually Ships in 1 - 3 Days

The Neutrik XIRIUM PRO NXP-RM-DANTE-E is a Digital Dante Output Module for the XIRIUM PRO Europe Receiver RX (NXP2RX-E).
Interested in hiring this product?
Send an enquiry now.
OR
Description

Details

Neutrik XIRIUM PRO NXP-RM-DANTE-E

The Neutrik XIRIUM PRO NXP-RM-DANTE-E is a Digital Dante Output Module for the XIRIUM PRO Europe Receiver RX (NXP2RX-E). 

With DiWA (Digital Wireless Audio) Neutrik has developed a technology for digital data transmission achieving high fidelity without data compression. A digital, uncompressed audio stream of 24 bit/48 kHz requires a bandwidth of 1.15 MHz. Such an amount of data can not be transmitted in the UHF band without using a compander. By choosing the 5 GHz band XIRIUM PRO provides 20 MHz bandwidth. Despite employing wireless technology, audio signals are transmitted at the level of quality found in a recording studio.

Specifications

GENERAL SPECIFICATIONS

  • Radio frequency carrier range: IEEE 802.11a, UNII-3 band from 5725 MHz to 5825 MHz (channels 149-165), license-free
  • Data protocol: Proprietary (DiWA technology)
  • Transmit power: Conducted 8 dBm / 14 dBm (with 6 dBi antenna)
  • Range: Up to 500 m point to point (LOS), longer range depending on obstacles, reflexions, interferences, XROC mode

AUDIO PERFORMANCE (ANALOG TO ANALOG PER WIRELESS LINK)

  • THD + Noise (TX Gain = min.): < 0.01 % @ 1 kHz, 4 dBu / < 0.05 % @ 20 Hz – 10 kHz, 4 dBu
  • Frequency response: +0.5 dB / -1.5 dB @ 20 Hz – 20 kHz ref. 1 kHz
  • Dynamic range: > 105 dB @ 1 kHz, A-weighted
  • Crosstalk: < -80 dB @ 20 kHz
  • Number of audio channels @ 24 mbps: 2
  • Number of audio channels @ 6 mbps: 1 (XROC mode)
  • Converter resolution (ADC & DAC): 24 bit
  • Sampling rate: 48 kHz
  • Latency (Delay): 3.6 msec (analog to analog)
  • Transmission method: Compression-free, no reduction of converted data
  • Operating temperature: 32° F to +122° F / 0 °C to +50 °C
  • Storage temperature: -4° F to +176° F / -20 °C to +80 °C

ADDITIONAL DIGITAL AUDIO INTERFACES

  • AES/EBU: 24 bit / 48 kHz according to AES3-2003
  • Dante AoE (Audio over Ethernet): proprietary protocol by Audinate®

RX SPECIFIC CHARACTERISTICS

  • Antenna 5-6GHz - Audio Transmission: Directional, 14dBi, 35° Elevation and 40° Azimuth, N-connector male
  • Antenna 2.4GHz - Control Data Transm.: 1/2 wave dipole with SMA female connectors
  • Number of audio channels: 2

ANALOG OUTPUT SPECS

  • Output Type - Line Output (balanced)
    • Output Level
    • Output Imp.: < 800 Ohm
    • Rated Source Imp.: 10 kOhm
    • Nominal.: 0 dBU (if TX source =  0 dBu)
    • Max. level: 22 dBU
  • Indicators: LEDs: Power ON / Start Up / Low Battery Status / Audio Delay / Linking Process / Audio reception
  • Controls: Power ON / Linking Process / Audio Delay
  • Power Supply: Mains input over powerCON TRUE1 (100-240 VAC 50/60 Hz) or internal battery (typical battery runtime 10 hours, depending on type of module, XROC mode, number of charging cycles and operating temperature)
Additional Information

Additional Information

Manufacturer Neutrik
SKU RNEUNXPRMDANTEE
Model NXP-RM-DANTE-E
GTIN NA