Currency:
T: 0151 707 4545

Neumann U47 FET Re-Issue - B-Stock (Ex Demo)

£2,100.00 £1,750.00 (ex. vat)




Neumann U47 FET

  • Neumann U47 FET
  • Neumann U47 FET
  • Neumann U47 FET
  • Neumann U47 FET
  • Neumann U47 FET
  • Neumann U47 FET

Neumann U47 FET Re-Issue - B-Stock (Ex Demo)

The Neumann U 47 fet Collectors Edition is a new edition of this classic, issued in the year 2014. For this, Neumann has resumed production of this classic mic, according to the original production documents and schematics. It is supplied with a high-quality wooden case with sophisticated special packaging, and an individual certificate with the serial number of the microphone.

This is a B-Stock item in mint condition.

In terms of technical design, the U 47 fet is a condenser microphone with a cardioid directional characteristic and fet 80 circuit technology. Among other things this technology, also used in the U 87, is characterized particularly by a wide dynamic range. The K 47 double large-diaphragm capsule was already employed in the U 47, the legendary tube-based predecessor of the U 47 fet. The K 47 provides a slight boost in the range above 2 kHz.

If required, a switchable low-cut filter raises the lower cutoff frequency electronically from 40 Hz to 140 Hz, thus suppressing undesirable low frequencies (such as impact sound and wind noise), or serving to compensate for the proximity effect. Switchable attenuation can reduce transmission levels by 10 dB, facilitating the processing of very high sound pressure levels of up to 147 dB. In addition, to prevent overloading of the connected preamp, the output signal can be reduced by 6 dB via a switch on the bottom of the microphone.

In order to ensure stable positioning, the microphone is swivel-mounted on an integrated bracket. The bracket stand connector has 5/8"-27 internal thread, with an adapter for 1/2" and 3/8" threads. The microphone cable can be secured at the side of the stand connector, by using the knurled nut to fasten it in the slot (for cable diameters of up to 5 mm). The microphone is available in classic nickel.

Rent the Neumann U47 Fet from our Hire Department

The Neumann U47 Fet is available for hire now. What's more, if you decide to buy it after hiring it, we will knock off the hire charges against the cost of the mic.

  • Daily rate: £30.00 (ex. vat)
  • Weekly rate: £90.00 (ex. vat)
  • Monthly rate: £300.00 (ex. vat)

Contact our Hire Department on 0151 236 7800 or hire@studiocare.com

Neumann U47 Fet Specifications

  • Acoustical operating principle: Pressure gradient transducer
  • Directional pattern: Cardioid
  • Frequency range: 40 Hz - 16 kHz
  • Sensitivity at 1 kHz into 1 kohm: 8 mV/Pa
  • Rated impedance: 150 ohms
  • Rated load impedance: 1 kohms
  • Equivalent noise level, CCIR1): 25 dB
  • Equivalent noise level, A-weighted1): 18 dB-A
  • Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL): 69 dB
  • Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL): 76 dB
  • Maximum SPL for THD 0.5%2): 137 dB
  • with preattenuation: 147 dB
  • Max. output voltage for THD < 0.5 %: -3.3 dBu
  • Power Supply (IEC 61938): P48
  • Current consumption: 0.5 mA
  • Required connector: XLR 3 F
  • Weight: 710 g
  • Diameter: 63 mm
  • Length: 160 mm
Manufacturer Neumann
SKU SNEUU47FETB
Model 006427
GTIN 4006087064276
Neumann
Neumann
006427
Contact Us

Studiocare Professional Audio Ltd.

Unit 2, 56 Evans Road


Liverpool

L24 9PB


Phone
+44 (0) 151 707 4545
+44 (0) 845 345 8910


Opening Hours
Mon - Fri: 9:30 - 5:30
Sat - Sun: Closed
Help

Contact
How To Find Us
Terms & Conditions
Shipping
Newsletter
Returns Form
Repair Request
Studiocare on FacebookStudiocare on TwitterStudiocare on Google+” width=Studiocare on YoutubeStudiocare on Pintrest

Studiocare
© Copyright Studiocare Professional Audio Ltd. 2016