Currency:
T: 0151 707 4545

Kenton Electronics Pro-Solo mk2 single channel MIDI to CV converter

£144.00 £120.00 (ex. vat)




Kenton Electronics Pro-Solo mk2 single channel MIDI to CV converter

  • Kenton Electronics Pro-Solo mk2 single channel MIDI to CV converter

Kenton Electronics Pro-Solo mk2 single channel MIDI to CV converter

The Kenton Electronics PRO-SOLO mk2 is designed to control one monosynth and features a single CV & Gate output, fully programmable auxiliary CV output and 1 LFO. Editing is easy with its LED display and non-volatile setup memory. Can also be used as a Sync 24 and arpeggio clock converter.

Kenton Pro Solo MKII Features

  • Designed to control all types of mono-synth
  • Super-fast response time
  • Famous Kenton build quality
  • Rugged steel case
  • High specification 16 bit D/A converters for rock-steady pitches
  • Runs from standard 9 volt power supply, 2.1mm centre positive
  • CV/Gate/Aux1 outputs on 3.5mm jack sockets (3.5mm to 1/4" cables are available in our cables section)
  • MIDI IN socket
  • MIDI THRU socket can be switched to become DIN SYNC or AUX 2 & 3
  • Any MIDI channel can be selected
  • Switchable for V/oct & Hz/V & 1.2V/oct scaling systems
  • Fine tune & scale are software controllable
  • Transpose (coarse tune) - up & down 12 semitones
  • Adjustable pitchbend range
  • Programmable Gate V-trig (up to 15v) or S-trig (with or without pull-up)
  • Multiple and single trigger modes
  • Note priority selection - newest / lowest / highest
  • Old notes are remembered to facilitate trill effects and increase playability
  • Portamento - fixed rate or fixed time modes
  • Auto Portamento mode selectable (where legato playing turns on Portamento)
  • Portamento Controller is selectable
  • Programmable Auxilary output controllable by any MIDI controller
  • Programmable LFO - 9 wave shapes inc. random
  • LFO can modulate pitch &/or AUX output
  • Separate Controllers for LFO to CV and LFO to AUX
  • LFO can be synchronised to MIDI clock
  • LFO sync point can be selected
  • Key-on can reset LFO
  • Aux1 output can output clock
  • Clock output can select from 1 to 12, 24, or 48 clocks per quarter note
  • All parameters are controllable in real-time by SysEx
  • Set-up are stored in non-volatile memory for easy recall
  • MIDI monitor mode - for easy MIDI troubleshooting
  • Power supply included - UK / EU / USA types available

What's new or different about the MkII?

  • Now runs from standard 9 volt power supply - centre positive
  • MIDI THRU socket can be switched to become DIN SYNC or AUX 2 & 3
  • Portamento - new fixed time mode as well as existing fixed rate
  • Auto Portamento mode selectable (where legato playing turns on Portamento)
  • LFO sync point can be selected
  • LFO to CV controller now has Min, Max and Reset values
  • LFO to Aux controller now has Min, Max and Reset values
  • Key-on can reset LFO
  • All parameters are controllable in real-time by SysEx
  • Aux1 output can output clock at 1 to 12, 24, or 48 clocks per quarter note
  • Din sync and clock can be used at the same time as CV and Gate outputs
  • Can control all 5 connections of a TB-303 5 Socket upgrade at the same time
  • Display now uses all three digits to display numbers
  • Box now an attractive cobalt blue colour
Manufacturer Kenton
SKU SKENPROSOLO
Model PROSOLOMK2
GTIN NA
Kenton
Kenton
PROSOLOMK2
Contact Us

Studiocare Professional Audio Ltd.

Unit 2, 56 Evans Road


Liverpool

L24 9PB


Phone
+44 (0) 151 707 4545
+44 (0) 845 345 8910


Opening Hours
Mon - Fri: 9:30 - 5:30
Sat - Sun: Closed
Help

Contact
How To Find Us
Terms & Conditions
Shipping
Newsletter
Returns Form
Repair Request
Studiocare on FacebookStudiocare on TwitterStudiocare on Google+” width=Studiocare on YoutubeStudiocare on Pintrest

Studiocare
© Copyright Studiocare Professional Audio Ltd. 2016