My Cart Checkout Speak to an expert! Call us on 0151 236 7800 0151 236 7800

Hardware

Set Ascending Direction

1-10 of 33

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  1. SKB SCPM2 - Large Rolling Powered Mixer Case with wheels and handle

    SKB SCPM2 - Large Rolling Powered Mixer Case with Wheels and Handle

    The SKB-SCPM2 Small Rolling Powered Mixer Soft Case has a rigid plastic core that is covered by a rugged 600 Denier exterior for protection to the knobs and delicate controls.Pull out handle and dual wheels for easy transport. The SKB-SCPM1 Powered M...
    £88.99 (inc. vat)
    £74.16 (ex. vat)

  2. SKB R4U - Roto rack 19" 4U Front Angled

    SKB R4U - Roto rack 19" 4U

    The SKB 4U Roto Rack is a completely re-designed Roto-molded rack case featuring a gasketed full front and rear covers for easy access. The SKB R4U features a bar design to allow for interlocking between multiple racks and allows the R4U to be secure...
    £153.00 (inc. vat)
    £127.50 (ex. vat)

  3. SKB RSF4U

    SKB RSF4U - Laptop/4U Rack with two step handle and wheels

    The SKB 19-RSF4U Studio Flyer featues a standard 4U rack mount for recording devices or a disk drive, and an extra large adjustable laptop or flatscreen compartment - the perfect solution for transporting and protecting portable studio equipment....
    £339.47 (inc. vat)
    £282.89 (ex. vat)

  4. SKB SC192U - 2U Soft Rack Case Front (Units/Antennas not included)

    SKB SC192U - 2U Soft Rack Case

    Primarily designed for wireless microphone systems, the SKB SC192U, a 2U rack size, is constructed of a wood core covered by 600 Denier Nylon. The case could also be used for pre-amps, effects, etc. This soft case has been developed with the focus on...
    £77.38 (inc. vat)
    £64.48 (ex. vat)

  5. SKB SC191U - 1U Soft Rack Case Front (Wireless unit not included)

    SKB SC191U - 1U Soft Rack Case

    Primarily designed for wireless microphone systems, the SKB SC191U, a 1U rack size, is constructed of a wood core covered by 600 Denier Nylon. The case could also be used for pre-amps, effects, etc. This soft case has been developed with the focus on...
    £56.84 (inc. vat)
    £47.37 (ex. vat)

  6. SKB RSF2U

    SKB RSF2U - Laptop/2U Rack with two step handle and wheels

    The SKB 19-RSF2U Studio Flyer is the perfect solution for housing your portable recording studio. With 2U of rack space for recording gear and a top surface for laptops or even smaller LCD screens....
    £240.00 (inc. vat)
    £200.00 (ex. vat)

  7. SKB Gig Rig R104 - Roto Rack 10x4 rack console, steel rails, hard top, L/R access door

    SKB Gig Rig R104 - Roto Rack 10x4 rack console, steel rails, hard top, L/R access door

    The 1SKB-R104 is a 10U slanted top and 4U front, rack case that features steel threaded rails, hard lid and doors, side access ports (for cable routing) and has enough space to mount the new AV-8 with the lid closed! The one piece base is roto-molded...
    £274.99 (inc. vat)
    £229.16 (ex. vat)

  8. SKB 4009BP - Bose L1 Model II pedestal case

    SKB 4009BP - Bose L1 Model II pedestal case

    The 4009BP is custom made for the Bose L1 Model II PS1 power stand and T1 ToneMatch Audio engine. It's the perfect companion to the SKB-5009BL L1/LII loudspeaker case. The SKB-4009BP is made of high density polyethylene (HDPE) that exceeds the ATA ca...
    £384.00 (inc. vat)
    £320.00 (ex. vat)

  9. SKB R1400 - Gig Safe, Roto-Moulded 14U slanted, Mixer case. Can mount to REX6

    SKB R1400 - Gig Safe, Roto-Moulded 14U slanted, Mixer case. Can mount to REX6

    The GigSafe takes the top 14U+ rack spaces of the Mighty GigRig and puts it in an easier to handle case. The GigSafe includes two large side mounted handles that allow the load to be balanced when carrying. The lid is extended so XLR cables can remai...
    £238.99 (inc. vat)
    £199.16 (ex. vat)

  10. SKB 1SKB-R6W - Wheeled Roto rack 19"; 6U CLosed

    SKB 1SKB-R6W - Wheeled Roto rack 19"; 6U

    The 1SKB-R6W 6U Wheeled Roto Rack from SKB provides a safe, secure and heavy-duty way to transport your audio equipment. The case is produced through a process called rotational molding - a 3-stage heating process that results in evenness all around ...
    £248.10 (inc. vat)
    £206.75 (ex. vat)

Set Ascending Direction

1-10 of 33

Page:
  1. 1
  2. 2
  3. 3
  4. 4