Currency:
T: 0151 707 4545

Focusrite Octopre MKII Dynamic - 8 Channel Microphone Preamplifier

£420.00 £350.00 (ex. vat)




Focusrite Octopre MKII Dynamic

  • Focusrite Octopre MKII Dynamic
  • Focusrite Octopre MKII Dynamic
  • Focusrite Octopre MKII Dynamic Rear

Focusrite Octopre MKII Dynamic - 8 Channel Microphone Preamplifier

The Focusrite Octopre MKII Dynamic features eight  microphone preamps, eight VCA-based Red 3-derived compressors and built-in 24-bit / 96kHz digital inputs and outputs. The Octopre MKII Dynamic is a feature-rich expansion upgrade for any digital audio workstation. It’s equally an ideal expansion for any analogue or digital console, or hard disk recorder.

Digital inputs and outputs let you make the most of often-neglected ADAT I/O; ideal for expanding the number of mic pre inputs on your interface or for providing analogue monitoring from any digital ADAT feed.

With this entire package fitting into a single 1U chassis complementing Focusrite’s Saffire PRO range, and all controls adjustable from the front fascia, OctoPre MkII Dynamic sets the standard for modern, compact, multi-channel recording expansions.

Key Features

Eight award-winning Focusrite preamps
Focusrite's unparalleled preamp legacy forms the foundation of this new device, with preamps optimised to handle extreme levels from sound sources like acoustic drums.

Eight ‘single-dial’ Focusrite compressors
A single dial gets you to the right amount of compression, fast. These new VCA-based, feed-forward compressors model the character of the celebrated Focusrite Red 3. 

Compress transparently or with effect
The classic soft-knee design achieves beautifully transparent compression that caresses your sound. Focusrite’s unique “More” switch doubles the ratio to deliver ‘compression with effect’.

Built-in eight-channel 24-bit / 96kHz digital outputs
Make the most of your interface's ADAT input for tracking, with eight channels of analogue to digital conversion via ADAT, boasting a ‘real world’ dynamic range performance of 110dB.

Built-in eight channel 24-bit / 96 kHz digital inputs
Switchable from the front panel, digital to analogue conversion via ADAT provides analogue monitoring of any digital ADAT feed, as well as the ability to clock from any ADAT device.

State-of-the-art clocking solutions
OctoPre MkII Dynamic's internal clock delivers a jitter performance of +/- 20 PPM. For external clocks, industry-standard JetPLL™ jitter elimination technology is employed

Two high-quality instrument inputs
OctoPre MkII Dynamic’s first two channels feature DI’s, ready for you to plug in your guitars and bass. No expensive external DI required.

  • Input clip and Compression active LEDs on every channel
  • 5 LED input metering on every channel
  • Phantom power available on every channel (switched in two groups: 1-4 and 5-8)
  • 24-bit resolution, 44.1, 48, 88.2 and 96kHz sampling rates
  • Internal clocking, master clocking and external clocking via BNC or ADAT

Specifications

Mic Input

  • Frequency Response: 20Hz - 20kHz +/- 0.1 dB
  • THD+N: 0.001% (measured at 1kHz with a 20Hz/22kHz bandpass filter)
  • Noise: EIN > 125dB (128dB analogue to digital): measured at ~60dB of gain with 150 Ohm termination (20Hz/22kHz bandpass filter)
  • Mic Gain: +10dB to + 55dB
  • Phantom power switched in 4 channel groups on Mic. 1-4 and 5-8
  • Maximum input level +16dBu

Line Input

  • Frequency Response: 20Hz - 20kHz +/- 0.1dB
  • THD+N: <0.001% (measured with 0dBFS input and 22Hz/22kHz bandpass filter)
  • Noise: -90dBu (22Hz/22kHz bandpass filter)
  • Line 1-8 Gain: -10dB to +36dB
  • Maximum input level +26dBu

Instrument Input

  • Frequency Response: 20Hz - 20kHz +/- 0.1dB
  • THD+N: 0.004% (measured with 0dBu input and 20Hz/22kHz bandpass filter)
  • Noise: -87dBu (20Hz/22kHz bandpass filter)
  • Instrument Gain: +10dB to +55dB
  • Maximum input level +16dBu

Analogue Output

  • Frequency Response: 20Hz – 20kHz +/- 0.2dB.
  • THD+N <0.0010% (-100dB) (measured with 0dBFS input 22Hz/22kHz bandpass filter, un-weighted)
  • Nominal output level 0dBFS = 16dBu, balanced

Compression

  • Threshold Range: -44dBFS (Max setting) to -4dBFS (Min setting)
  • Compression Ratio Normal: 2:1, More: 4:1
  • Auto Make Up Gain: 4dB (Min setting), 18dB (Max setting)
  • Attack Time: 1.2ms, Release Time: 28ms (-3.5dB method)
  • Compression Curve: Classic Focusrite Soft Knee
  • THD+N (maximum at any compression threshold, input < +16dBu, gain at minimum): < 0.18%

Digital

  • A/D Dynamic Range 110dB ‘A-weighted’ (all inputs)
  • D/A Dynamic Range 110dB ‘A-weighted’ (all outputs)
  • Clock Jitter < 250 pico seconds
  • Sample rates: 44.1kHz to 96kHz
  • Sample Rate Clock Accuracy: +/- 20PPM
  • JetPLL technology providing superb jitter reduction for class leading converter performance
  • Clock sources: Internal, Word Clock and ADAT (from ADAT1 input only)

Weight

  • Single unit unboxed net weight : 3.6 kg / 7.3 lbs
  • Single unit boxed net weight : 4.05 kg / 8.9 lbs

Dimensions

  • Unboxed: W = 484mm / 19”, H = 45mm / 1.8”, D = 265mm / 10.4”
  • Boxed: W= 595 mm / 23.5”, H= 120 mm / 4.75”, D= 340 mm / 13.4”

FRONT AND REAR CONNECTIVITY

Analogue Channel Inputs:

  • 2x Mic / Line / Instrument inputs on the rear panel (Inputs 1 and 2). Switches automatically between Mic (XLR) and Line (TRS). Instrument selected via front panel buttons.
  • 6x Mic / Line inputs on the rear panel. Switches automatically between Mic (XLR) and Line (TRS).

Analogue Channel Outputs:

  • 8x Balanced 1/4" TRS Jack on the rear panel
  • Switching to enable monitoring of A/D inputs or ADAT inputs with ADDA switch on front panel.

Digital I/O:

  • 2x ADAT Lightpipe (TOSLINK) inputs. Provides 8 channels at 44.1 and 48kHz (please note that in this mode, only ADAT input 1 is active, allowing for a total of 8 ADAT input channels at 44.1 / 48kHz). Provide 4 channels per port (8 total) at 88.2 and 96kHz (S-MUX).
  • 2x ADAT Lightpipe (TOSLINK) outputs. Provides 8 channels per port (16 total) at 44.1 and 48kHz (please note that in this mode, the digital outputs are mirrored, providing outputs 1 - 8 on both ports). Provides 4 channels per port (8 total) at 88.2 and 96kHz (S-MUX).Word-Clock in and out on rear panel BNC connectors

Front Panel Indicators:

  • 8x Five segment input LED meters (-42, -18, -6, -3 and 0dBFS)
  • 4x Sample Rate LED's (44.1k, 48k, 88.2k and 96k)
  • 3x Sync Source LED's (Internal, Word Clock and ADAT)
  • 'Lock' indicator LED
  • ADDA Switch for analogue output source selection (A/D’s or ADAT inputs)
Manufacturer Focusrite
SKU SFOCPLATOCTOPREDYNMKII
Model OCTOPREMKIIDYN
GTIN 0815301008101
Focusrite
Focusrite
OCTOPREMKIIDYN
Contact Us

Studiocare Professional Audio Ltd.

Unit 2, 56 Evans Road


Liverpool

L24 9PB


Phone
+44 (0) 151 707 4545
+44 (0) 845 345 8910


Opening Hours
Mon - Fri: 9:30 - 5:30
Sat - Sun: Closed
Help

Contact
How To Find Us
Terms & Conditions
Shipping
Newsletter
Returns Form
Repair Request
Studiocare on FacebookStudiocare on TwitterStudiocare on Google+” width=Studiocare on YoutubeStudiocare on Pintrest

Studiocare
© Copyright Studiocare Professional Audio Ltd. 2016