Currency:
T: 0151 707 4545

Earthworks M30MP Omni Measurement Microphone Matched Pair In Case

£1,639.52 £1,366.27 (ex. vat)




Earthworks M30MP

  • Earthworks M30MP
  • Earthworks M30MP

Earthworks M30MP Omni Microphone Matched Pair in Case

The Earthworks M30MP is a matched pair of omni measurement microphones with a 30kHz flat frequency response and is remarkably stable with respect to temperature and atmospheric conditions.

The M Series has become the accepted standard for affordable, reliable reference and measurement microphones that are accurate in the time domain and frequency response. They are remarkably stable with respect to temperature and atmospheric conditions and are optimized for clean, very fast impulse performance providing accurate wideband response with virtually no handling noise.

Earthworks M30 Features

  • 30kHz flat frequency response
  • Ideally suited for acoustical measurements including loudspeaker design and quality control, sound system setup and troubleshooting, room acoustics, or any application where an accurate free-field measurement microphone is required
  • Improved version of the SMAARTMIC™ previously offered by EAW
  • Omnidirectional polar pattern
  • Flat frequency response, fast impulse response and exceptional polar characteristics
  • Used by SMAART™, MLSSA™, Spectrafoo™, TEF™ and RTA in addition to acoustic measurement systems manufactured by dbx, DEQX and others
  • Meets or exceeds ANSI Type 1 and applicable IEC 61094 requirements
  • Requires 48V Phantom Power
  • Each M Series microphone is delivered with its own calibration chart providing its individually measured open-circuit sensitivity and the frequency response curve
  • Electronic Calibration File available
  • Operating Temp Range: -10 deg C to +40 deg C ( 14 deg. F to 104 deg. F)
  • Storage Temp Range: -20 deg C to +50 deg C ( -4 deg. F to 122 deg. F)

Earthworks M30 Specifications

  • Frequency Response: 5Hz to 30kHz ±1/-3dB
  • Polar Pattern: Omnidirectional
  • Sensitivity: 30mV/Pa (-30.5dBV/Pa)
  • Power Requirements: 48V Phantom, 10mA
  • Max Acoustic Input: 142dB SPL
  • Output: XLR (pin 2+)
  • Output Impedance: 100Ω, balanced (50Ω ea. pin 2 & 3)
  • Min Output Load: 600Ω between pins 2 & 3
  • Noise: 22dB SPL equivalent (A weighted)
  • Dimensions L x D: 229mm x 22mm (9 x .860 inches)
  • Weight: .5 lb. (225g)
Manufacturer Earthworks
SKU SEARM30MP
Model Earthworks M30MP
GTIN N/A
Earthworks
Earthworks
Earthworks M30MP
Contact Us

Studiocare Professional Audio Ltd.

Unit 2, 56 Evans Road


Liverpool

L24 9PB


Phone
+44 (0) 151 707 4545
+44 (0) 845 345 8910


Opening Hours
Mon - Fri: 9:30 - 5:30
Sat - Sun: Closed
Help

Contact
How To Find Us
Terms & Conditions
Shipping
Newsletter
Returns Form
Repair Request
Studiocare on FacebookStudiocare on TwitterStudiocare on Google+” width=Studiocare on YoutubeStudiocare on Pintrest

Studiocare
© Copyright Studiocare Professional Audio Ltd. 2016