Currency:
T: 0151 707 4545

DPA ST4006C - Stereo Pair, 2x 4006C Microphones, Compact

£2,760.00 £2,300.00 (ex. vat)




DPA ST4006C - Stereo Pair, 2x 4006C Microphones, Compact

  • DPA ST4006C - Stereo Pair, 2x 4006C Microphones, Compact

DPA ST4006C - Stereo Pair, 2x 4006C  Microphones, Compact

The DPA d:dicate 4006C Stereo Pair is an industry standard, compact, omni-directional, condenser stereo mic set that performs with clear and neutral sound in a small and discreet format. Defined by its impressive performance and inconspicuous design, the 4006C has been used in scenarios where concealed and clear sound has been needed. 

Used as a stereo pair, 4006C creates a clear stereo image while recording pianos, choirs and drum overheads, but also works well when used solo on acoustic guitars, classical string and woodwind instruments and vocals. It's design lets the mic be mounted, hung or concealed depending on the performance needs,  
For close micing, the omni-directional pick up pattern reduces bass boost proximity effect that cardioid mics can suffer from, meaning the 4006C can be positioned extremely close to the source without issue.

Each 4006C in the stereo pair is matched to within ±0.5 dB on both frequency response and sensitivity and the maximum phase response difference is 5°.  Even though the standard tolerances on DPA Reference Standards are extremely low, a stereo match is even closer. 

DPA ST4006C Stereo Pair Features

  • carefully matched microphones
  • compact size and natural sound
  • full-bodied sound from a small-bodied mic
  • PeliTM Case transportation and protection

DPA ST4006C Specifications

  • Directional pattern: Omnidirectional
  • Principle of operation: Pressure
  • Cartridge type: Pre-polarized condenser
  • Frequency range: 10 Hz - 20 kHz
  • Frequency range, ± 2 dB: 10 Hz - 20 kHz
  • Sensitivity, nominal, ± 2 dB at 250 Hz: 40 mV/Pa; -28 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))
  • Equivalent noise level, ITU-R BS.468-4: Typ. 27 dB (max. 29 dB)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 79 dB(A)
  • Total Harmonic Distortion (THD): < 1 % up to 139 dB SPL peak
  • Dynamic range: Typ. 124 dB
  • Max. SPL, peak before clipping: 147 dB
  • Switchable attenuator: 0 dB / -20 dB
  • Output impedance: < 200 ohm
  • Minimum load impedance: 2 kohm
  • Cable drive capability: 100 m (328 ft)
  • Output balance principle: Impedance balancing with Active Drive
  • Common Mode Rejection Ratio (CMRR): > 60 dB
  • Power supply (for full specifications): 48 V Phantom power (± 4 V)
  • Current consumption: 2.8 mA
  • Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
  • Color: Matte black
  • Weight: 163 g (5.7 oz)
  • Microphone diameter: 16 - 19 mm (0.6 - 0.75 in)
  • Capsule diameter: 16 mm (0.6 in)
  • Microphone length: 170 mm (6.7 in)
  • Output voltage, RMS: > 5 V
  • Polarity: +V at pin 2 for positive sound pressure
  • Temperature range: -40 °C to 50 °C (-40 °F to 122 °F)
  • Relative Humidity (RH): Up to 90%
  • Classification: Conforms to IEC 61672 Class I (with Near-field Grid DD0251)
  • Matching tolerance: ± 0.5 dB
  • Phase deviation for kit: < 5°
Manufacturer DPA Microphones
SKU SDPAST4006C
Model DPA ST4006C - Stereo Pair, 2x 4006C Microphones, Compact
GTIN No
DPA Microphones
DPA Microphones
DPA ST4006C - Stereo Pair, 2x 4006C Microphones, Compact
Contact Us

Studiocare Professional Audio Ltd.

Unit 2, 56 Evans Road


Liverpool

L24 9PB


Phone
+44 (0) 151 707 4545
+44 (0) 845 345 8910


Opening Hours
Mon - Fri: 9:30 - 5:30
Sat - Sun: Closed
Help

Contact
How To Find Us
Terms & Conditions
Shipping
Newsletter
Returns Form
Repair Request
Studiocare on FacebookStudiocare on TwitterStudiocare on Google+” width=Studiocare on YoutubeStudiocare on Pintrest

Studiocare
© Copyright Studiocare Professional Audio Ltd. 2016