Currency:
T: 0151 707 4545

DPA ST2011C - Stereo Pair, 2x 2011C Microphones, Compact

£1,320.00 £1,100.00 (ex. vat)




DPA ST2011C - Stereo Pair, 2x 2011C Microphones, Compact

  • DPA ST2011C - Stereo Pair, 2x 2011C Microphones, Compact

DPA ST2011C - Stereo Pair, 2x 2011C Microphones, Compact

The DPA d:dicate ST2011C Stereo Pair is a twin diaphragm, compact, cardioid condenser microphone set. Sharing much of the same tech and components from the 4000 series, DPA’s flagship condenser mic line, the 2011C offers similar performance at an affordable price.

The capsule design contains two, opposite facing diaphragms, which are rebuilt into a single capsule. This means the mic has the advantages of a small capsule, with a fast impulse response and a large frequency bandwidth, but has lower inherent noise thanks to its larger overall diaphragm surface area. The 2011C contains an MMP-C pre-amplifier that subtly adds a little more “body” to the low end, and its compact size makes the mic much easier to position.

The 2011C offers linear response at off axis positions, meaning a better gain to feedback ratio and making stage separation and mic level easier to control. The mic is also of a modular design, meaning it’s easy to swap out the capsule to change the pick-up pattern. Each pairing is selected on sensitivity within ±1.5 dB making several stereo principles like XY and ORTF easy to obtain.

DPA ST2011C Stereo Pair Features

  • Sensitivity selected pair
  • Superb stage separation and level control
  • Low profile mounting options
  • PeliTM Case transportation and protection

DPA ST2011C Stereo Pair Specifications

  • Directional pattern: Cardioid
  • Principle of operation: Pressure gradient, with interference tube
  • Cartridge type: Pre-polarized condenser, Twin Diaphragm Capsule
  • Frequency range: 20 Hz - 20 kHz
  • Frequency range, ± 2 dB, at 30 cm: 50 Hz - 17 kHz with 3 dB soft boost at 12 kHz
  • Sensitivity, nominal, ± 2 dB at 1 kHz: 10 mV/Pa; -40 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 20 dB(A) re. 20 µPa (max. 23 dB(A))
  • Equivalent noise level, ITU-R BS.468-4: Typ. 33 dB (max. 36 dB)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 74 dB(A)
  • Total Harmonic Distortion (THD) at 1 kHz: < 1 % up to 137 dB SPL peak
  • Dynamic range: Typ. 117 dB
  • Max. SPL, peak before clipping: 146 dB
  • Minimum load impedance: 2 kohm
  • Output impedance: < 200 ohm
  • Cable drive capability: 100 m (328 ft)
  • Output balance principle: Impedance balancing with Active Drive
  • Common Mode Rejection Ratio (CMRR): > 50 dB
  • Power supply (for full specifications): 48 V Phantom power (± 4 V)
  • Current consumption: 2.8 mA
  • Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
  • Color: Matte black
  • Weight: 64 g (2.3 oz)
  • Microphone diameter: 19 mm (0.75 in)
  • Microphone length: 92 mm (3.6 in)
  • Output voltage, RMS: > 4 V
  • Polarity: +V at pin 2 for positive sound pressure
  • Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
  • Relative Humidity (RH): Up to 90%
  • Sensitivity selection tolerance (at 1 kHz): ± 1.5 dB
Manufacturer DPA Microphones
SKU SDPAST2011C
Model DPA ST2011C
GTIN N/A
DPA Microphones
DPA Microphones
DPA ST2011C
Contact Us

Studiocare Professional Audio Ltd.

Unit 2, 56 Evans Road


Liverpool

L24 9PB


Phone
+44 (0) 151 707 4545
+44 (0) 845 345 8910


Opening Hours
Mon - Fri: 9:30 - 5:30
Sat - Sun: Closed
Help

Contact
How To Find Us
Terms & Conditions
Shipping
Newsletter
Returns Form
Repair Request
Studiocare on FacebookStudiocare on TwitterStudiocare on Google+” width=Studiocare on YoutubeStudiocare on Pintrest

Studiocare
© Copyright Studiocare Professional Audio Ltd. 2016