Currency:
T: 0151 707 4545

DPA ST2006A - Stereo Pair, 2x 2006A Microphones

£1,560.00 £1,300.00 (ex. vat)




DPA ST2006A - Stereo Pair, 2x 2006A Microphones

  • DPA ST2006A - Stereo Pair, 2x 2006A Microphones

DPA ST2006A - Stereo Pair, 2x 2006A Microphones

The DPA d:dicate ST2006A Stereo Pair is a twin diaphragm omni-directional condenser microphone kit. Based on DPA's popular 4006 omni mic, the 2006 shares much of the same design ethos and performance from the 4000 line, but is available at a more affordable price for price concious customers.

The DPA 2006A features two opposite facing diaphragms, which are rebuilt into a single capsule composition. This means the mic has the advantages of a small capsule, with a fast impulse response and a large frequency bandwidth, but has lower inherent noise thanks to its larger overall diaphragm surface area.

The mic is also of a modular design, meaning it’s easy to swap out the capsule to change the pick-up pattern. It's omni design and high frequency response means it's great as an ambient room mic, as a single overhead for a drum kit, choirs, acoustic instruments and other uses. 

The DPA ST2006A is a complete stereo Pair with two hand picked omni microphones, selected on sensitivity within ±1.5 dB.

DPA 2006A Stereo Pair Features

  • Sensitivity selected pair
  • Acoustic authenticity
  • Linear in a large frequency bandwidth
  • PeliTM Case transportation and protection

DPA 2006A Specifications

  • Directional pattern: Omnidirectional
  • Principle of operation: Pressure
  • Cartridge type: Pre-polarized condenser, Twin Diaphragm Capsule
  • Frequency range: 20 Hz to 20 kHz
  • Frequency range, ± 2 dB: 50 Hz to 20 kHz with typ. 3 dB soft boost at 14 kHz
  • Sensitivity, nominal, ± 2 dB at 1 kHz: 40 mV/Pa; -28 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 16 dB(A) re. 20 µPa (max. 18 dB(A))
  • Equivalent noise level, ITU-R BS.468-4: Typ. 28 dB (max. 30 dB)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 78 dB(A)
  • Total Harmonic Distortion (THD) at 1 kHz: < 1 % up to 130 dB SPL peak
  • Minimum load impedance: 2 kohm
  • Dynamic range: Typ. 114 dB
  • Max. SPL, peak before clipping: 141 dB
  • Switchable attenuator: 0 dB / -20 dB
  • Output impedance: < 200 ohm
  • Cable drive capability: 100 m (328 ft)
  • Output balance principle: Impedance balancing with Active Drive
  • Common Mode Rejection Ratio (CMRR): > 60 dB
  • Power supply (for full specifications): 48 V Phantom power (± 4 V)
  • Current consumption: 2.8 mA
  • Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
  • Color: Matte black
  • Microphone weight: 160 g (5.6 oz)
  • Microphone diameter: 19 mm (0.75 in)
  • Microphone length: 164 mm (6.5 in)
  • Output voltage, RMS: > 5 V
  • Polarity: +V at Pin 2 for positive sound pressure
  • Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
  • Relative Humidity (RH): Up to 90%
Manufacturer DPA Microphones
SKU SDPAST2006A
Model DPA ST2006A - Stereo Pair, 2x 2006A Microphones
GTIN N/A
DPA Microphones
DPA Microphones
DPA ST2006A - Stereo Pair, 2x 2006A Microphones
Contact Us

Studiocare Professional Audio Ltd.

Unit 2, 56 Evans Road


Liverpool

L24 9PB


Phone
+44 (0) 151 707 4545
+44 (0) 845 345 8910


Opening Hours
Mon - Fri: 9:30 - 5:30
Sat - Sun: Closed
Help

Contact
How To Find Us
Terms & Conditions
Shipping
Newsletter
Returns Form
Repair Request
Studiocare on FacebookStudiocare on TwitterStudiocare on Google+” width=Studiocare on YoutubeStudiocare on Pintrest

Studiocare
© Copyright Studiocare Professional Audio Ltd. 2016