My Cart Checkout Speak to an expert! Call us on 0151 236 7800 0151 236 7800

DPA Drum Pack - 4 x d:dicate 2011C Compact Cardioid Microphone (Overheads, Kick, Snare), 3 x d:vote 4099D (Toms, Snare) & Peli Case

DPA Drum Pack - 4 x d:dicate 2011C Compact Cardioid Microphone (Overheads, Kick, Snare), 3 x d:vote 4099D (Toms, Snare) & Peli Case
£2,910.60 (inc. vat)
£2,425.50 (ex. vat)

The DPA Drum Pack Mic Kit is a 7 piece drum mic package consisting of three 4099D instrument mics and four 2011C compact small diaphragm condenser mics along with all relevant clips and clamps.
Interested in hiring this product?
Send an enquiry now.
OR
Description

DPA Drum Pack - 7 Peice Drum Mic Kit 

The DPA Drum Pack Mic Kit is a 7 piece drum mic package consisting of three 4099D instrument mics and four 2011C compact small diaphragm condenser mics along with all relevant clips and clamps.

The 4099D instrument mic is a perfect choice for toms, offering brilliant clarity and great off axis attenuation. The 2011C is a sensitive condenser that is designed for use with snare, hi hats and overheads thanks to its high frequency pick up response and high SPL handling. Additionally, the package comes in a heavy duty, tour ready Peli case for extra protection.

DPA Drum Pack Included Mics

  • 1 x Snare mic: DPA d:dicate™ 2011C
  • 1 x Hi-hat mic: DPA d:dicate™ 2011C
  • 2 x Overhead mics: DPA d:dicate™ 2011C
  • 3 x Tom mics: DPA d:vote™ 4099D

DPA 4099D Instrument Mic Specifications

  • Directional characteristics: Supercardioid
  • Principle of operation: Pressure gradient
  • Cartridge type: Pre-polarized condenser
  • Frequency range: 20 Hz to 20 kHz
  • Frequency range, ± 2 dB, 20 cm (7.9 in) distance: 80 Hz to 15 kHz with 2 dB soft boost at 10 to 12 kHz
  • Sensitivity, nominal ± 3 dB at 1 kHz: 2 mV/Pa; -54 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 28 dB(A) re. 20 μPa (max. 31 dB(A))
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): 66 dB(A)
  • Total Harmonic Distortion (THD): <1 % up to 123 dB SPL peak; <1 % up to 120 dB SPL RMS sine
  • Dynamic range: 95 dB
  • Max. SPL, peak before clipping: 152 dB
  • Output impedance: From MicroDot: 30 to 40 ohm; from DAD6001: 100 ohm
  • Cable drive capability: Up to 300 m (984 ft) with DAD6001 XLR adapter
  • Output balance principle: Signal balanced with DAD6001 XLR adapter
  • Common Mode Rejection Ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001 XLR adapter
  • Power supply (for full performance): Min. 5 V to max. 50 V through DPA adapter for wireless systems; 48 V phantom power +/- 4 V with DAD6001 XLR adapter
  • Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001 XLR adapter
  • Connector: MicroDot
  • Color: Black
  • Capsule diameter: 5.4 mm (0.2 in)
  • Microphone length: 45 mm (1.8 in)
  • Cable length: 1.8 m (6 ft)
  • Polarity: Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)
  • Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
  • Relative Humidity (RH): Up to 90%
  • Gooseneck length: 140 mm (5.5 in)

DPA 2011C Compact Condenser Specifications

  • Directional pattern: Cardioid
  • Principle of operation: Pressure gradient, with interference tube
  • Cartridge type: Pre-polarized condenser, Twin Diaphragm Capsule
  • Frequency range: 20 Hz to 20 kHz
  • Frequency range, ± 2 dB, at 30 cm: 50 Hz to 17 kHz with 3 dB soft boost at 12 kHz
  • Sensitivity, nominal, ± 2 dB at 1 kHz: 10 mV/Pa; -40 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 20 dB(A) re. 20 µPa (max. 23 dB(A))
  • Equivalent noise level, ITU-R BS.468-4: Typ. 33 dB (max. 36 dB)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 74 dB(A)
  • Total Harmonic Distortion (THD) at 1 kHz: < 1 % up to 137 dB SPL peak
  • Minimum load impedance: 2 kohm
  • Dynamic range: Typ. 117 dB
  • Max. SPL, peak before clipping: 153 dB
  • Switchable attenuator: 0 dB / -20 dB
  • Output impedance: < 200 ohm
  • Cable drive capability: 100 m (328 ft)
  • Output balance principle: Impedance balancing with Active Drive
  • Common Mode Rejection Ratio (CMRR): > 60 dB
  • Power supply (for full specifications): 48 V Phantom power (± 4 V)
  • Current consumption: 2.8 mA
  • Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
  • Color: Matte black
  • Microphone weight: 164 g (5.8 oz)
  • Microphone diameter: 19 mm (0.75 in)
  • Microphone length: 198 mm (7.8 in)
  • Output voltage, RMS: > 5 V
  • Polarity: +V at Pin 2 for positive sound pressure
  • Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
  • Relative Humidity (RH): Up to 90% 

 

Additional Information

Additional Information

Manufacturer DPA Microphones
SKU SDPADRUMPACK
Model DPA Drum Pack
GTIN N/A