Currency:
T: 0151 707 4545

DPA 5015A Surround Kit with 5 x 4015A Wide Cardioid Mics

£6,204.00 £5,170.00 (ex. vat)




DPA 5015A Surround Kit with 5 x 4015A Wide Cardioid Mics

  • DPA 5015A Surround Kit with 5 x 4015A Wide Cardioid Mics

DPA 5015A Surround Kit with 5 x 4015A Wide Cardioid Mics

The DPA d:dicate 5015A Surround Mic kit is designed to provide a focused multi-mic solution for surround and multi mic recording settings.

Consisting of five 4015A wide cardioid (hemispheric) condenser mics, tuned to within 0.5dB difference  of each other, the DPA standard tolerances are tuned even further to harmonise each mic’s response for a refined and balanced sound.

Recording orchestras or other acoustic ensembles sometimes requires a compromise between blending in the room reverberation and a more precise localization. The natural response and dynamic range make the DPA 4015As an obvious choice for Precise tone quality and wide dynamic range make 5015A right for AB, Decca Tree or surround main arrays like the DPA Wide Cardioid Surround Array.

The DPA 5015A comes packed in a hard wearing, heavy duty Peli case for transportation and protection and all relevant mic clips and windshields are included.

DPA 5015A Features

  • Wide pickup area and natural sound
  • Five carefully matched microphones
  • Ambience pickup with convenient directionality
  • PeliTM Case transportation and protection

DPA 5015A Specifications

Directional pattern: Wide cardioid
Principle of operation: Pressure gradient
Cartridge type: Pre-polarized condenser
Frequency range: 20 Hz - 20 kHz
Frequency range, ± 2 dB, at 60 cm: 40 Hz - 20 kHz
Sensitivity, nominal, ± 2 dB at 1 kHz: 10 mV/Pa; -40 dB re. 1 V/Pa
Equivalent noise level, A-weighted: Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A))
Equivalent noise level, ITU-R BS.468-4: Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 76 dB(A)
Total Harmonic Distortion (THD): < 1 % up to 139 dB SPL peak
Dynamic range: Typ. 121 dB
Max. SPL, peak before clipping: 159 dB
Switchable attenuator: 0 dB / -20 dB
Output impedance: < 200 ohm
Minimum load impedance: 2 kohm
Cable drive capability: 100 m (328 ft)
Output balance principle: Impedance balancing with Active Drive
Common Mode Rejection Ratio (CMRR): > 60 dB
Power supply (for full specifications): 48 V Phantom power (± 4 V)
Current consumption: 2.8 mA
Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Color: Matte black
Weight: 158 g (5.6 oz)
Microphone diameter: 19 mm (0.75 in)
Capsule diameter: 19 mm (0.75 in)
Microphone length: 170 mm (6.7 in)
Output voltage, RMS: > 5 V
Polarity: +V at pin 2 for positive sound pressure
Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
Relative Humidity (RH): Up to 90%
Matching tolerance: ± 1 dB
Phase deviation for kit: < 10°
Manufacturer DPA Microphones
SKU SDPA5015A
Model DPA 5015A Surround Kit with 5 x 4015A Wide Cardioid Mics
GTIN N/A
DPA Microphones
DPA Microphones
DPA 5015A Surround Kit with 5 x 4015A Wide Cardioid Mics
Contact Us

Studiocare Professional Audio Ltd.

Unit 2, 56 Evans Road


Liverpool

L24 9PB


Phone
+44 (0) 151 707 4545
+44 (0) 845 345 8910


Opening Hours
Mon - Fri: 9:30 - 5:30
Sat - Sun: Closed
Help

Contact
How To Find Us
Terms & Conditions
Shipping
Newsletter
Returns Form
Repair Request
Studiocare on FacebookStudiocare on TwitterStudiocare on Google+” width=Studiocare on YoutubeStudiocare on Pintrest

Studiocare
© Copyright Studiocare Professional Audio Ltd. 2016