My Cart Checkout Speak to an expert! Call us on 0151 236 7800 0151 236 7800

DPA 5006A Surround Kit with 5 x 4006A Omni-directional Mics

DPA 5006A Surround Kit with 5 x 4006A Omni-directional Mics
£6,700.80 (inc. vat)
£5,584.00 (ex. vat)

The DPA d:dicate 5006A Surround Mic kit is designed to provide a multi-mic solution for decca tree and surround main array scenarios.
Interested in hiring this product?
Send an enquiry now.
OR
Description

DPA 5006A Surround Kit with 5 x 4006A Omni-directional Mics

The DPA d:dicate 5006A Surround Mic kit is designed to provide a multi-mic solution for decca tree and surround main array scenarios.

Consisting of five 4006A omni-directional condenser mics, matched to within 0.5dB of each other, the DPA standard tolerances are tuned even further to harmonise the mics with each other for a refined and balanced sound.

The natural sound, high sensitivity, low noise-floor and extremely linear frequency response from 10 Hz to 20 kHz (±2 dB) of the microphones make the DPA 4006As the perfect choice for all AB Stereo, Decca Tree or surround main array recordings. The precise reproduction, total transparency and natural-sounding clarity of a DPA 4006A microphone will provide you with a lifetime of satisfying listening.

The DPA 5006A comes packed in a hard wearing, heavy duty Peli case for transportation and protection, and all relevant mic clips and windshields are included.

DPA 5006A Surround Kit Features

  • Five carefully matched microphones
  • Perfect for Decca Tree + rear omnis surround array
  • Specially useful for acoustically accurate reproductions
  • PeliTM Case transportation and protection

DPA 5006A Specifications

  • Directional pattern: Omnidirectional
  • Principle of operation: Pressure
  • Cartridge type: Pre-polarized condenser
  • Frequency range: 10 Hz - 20 kHz
  • Frequency range, ± 2 dB: 10 Hz - 20 kHz
  • Sensitivity, nominal, ± 2 dB at 250 Hz: 40 mV/Pa; -28 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 15 dB(A) re. 20 µPa (maks. 17 dB(A))
  • Equivalent noise level, ITU-R BS.468-4: Typ. 27 dB (max. 29 dB)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 79 dB(A)
  • Total Harmonic Distortion (THD): < 1 % up to 139 dB SPL peak
  • Dynamic range: Typ. 124 dB
  • Max. SPL, peak before clipping: 147 dB
  • Switchable attenuator: 0 dB / -20 dB
  • Output impedance: < 200 ohm
  • Minimum load impedance: 2 kohm
  • Cable drive capability: 100 m (328 ft)
  • Output balance principle: Impedance balancing with Active Drive
  • Common Mode Rejection Ratio (CMRR): > 60 dB
  • Power supply (for full specifications): 48 V Phantom power (± 4 V)
  • Current consumption: 2.8 mA
  • Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
  • Color: Matte black
  • Weight: 163 g (5.7 oz)
  • Microphone diameter: 16 - 19 mm (0.6 - 0.75 in)
  • Capsule diameter: 16 mm (0.6 in)
  • Microphone length: 170 mm (6.7 in)
  • Output voltage, RMS: > 5 V
  • Polarity: +V at pin 2 for positive sound pressure
  • Temperature range: -40 °C to 50 °C (-40 °F to 122 °F)
  • Relative Humidity (RH): Up to 90%
  • Matching tolerance (freqency response, sensitivity): ± 0.5 dB
  • Phase deviation for kit: < 5°
Additional Information

Additional Information

Manufacturer DPA Microphones
SKU SDPA5006A
Model DPA 5006A Surround Kit with 5 x 4006A omnis
GTIN N/A