Currency:
T: 0151 707 4545

DBX 160SL Dual compressor limiter - B-Stock

£1,194.00 £995.00 (ex. vat)




DBX 160SL Dual compressor limiter - B-Stock

  • DBX 160SL Dual compressor limiter - B-Stock
  • DBX 160SL Dual compressor limiter - B-Stock Rear

DBX 160SL - B-Stock

The DBX 160 SL is a 2U, dual compressor limiter that combines the best features of all the great dbx compressors, past and present, and gives you more versatile performance than ever before. 

This is a B-Stock item.

 

DBX 160SL Features

  • Patent-pending AutoVelocity™ circuit
  • 127dB of Dynamic Range
  • High-Drive output transformer circuit drives 1000 ft. of Belden® cable at +30dBu with only .007% THD
  • Switchable between Hard-knee and OverEasy® Compression
  • Program-dependent "Auto," AutoVelocity™ or fully variable attack ad release manual modes

Specifications

  • Input Connectors: Female XLR Pin 2 hot, pin 1 lift switch
  • Input Type: Electronically balanced/unbalanced, RF filtered
  • Input Impedance: Balanced > 20 k ohm, unbalanced > 10 k ohm
  • Max Input: >+30dBu balanced, > +26dBu unbalanced
  • CMRR: >100dB 20 Hz to 200 Hz, >80dB 200 Hz to 2 kHz, >60dB 2 kHz to 20 kHz
  • Output Connectors: Male XLR Pin 2 hot
  • Output Type: Transformer balanced/unbalanced, RF filtered
  • Output Impedance: Balanced 50ohm, unbalanced 25ohm
  • Max Output: Bal >+30dBm (into 600 ohm); Unbalanced (with UNBAL switch engaged) >+24dBm (into 600 ohm)
  • Sidechain Input Connector: Female XLR Pin 2 hot
  • Sidechain Input Type: Electronically balanced/unbalanced, RF filtered
  • Sidechain Impedance: Balanced >20 k ohm, unbalanced >10k ohm
  • Sidechain Max Input Level: >+30dBu balanced or unbalanced
  • Sidechain Output Connector: Male XLR Pin 2 hot
  • Sidechain Output Type: Unbuffered, hard-wired to INPUT, RF filtered
  • Bandwidth: 01dB: 20 Hz to 20 kHz +0/-0.1dB, no gain reduction, unity gain; 1.0dB: <4 Hz to >40 kHz +0/-1.0dB, no gain reduction, unity gain
  • Frequency Response: <2 Hz to >200 kHz +0/-3.0dB, no gain reduction, unity gain
  • Noise: <-92dBu, unweighted, 20 Hz to 20 kHz measurement bandwidth
  • Dynamic Range: >122dB
  • THD+Noise: 0.008% typical at +4dBu, 1kHz, unity gain; 0.05% typical at +30dBu, 1kHz, unity gain; <0.1% any amount of compression up to 30dB, 1kHz
  • IMD: <0.02% SMPTE 4:1, no gain reduction, unity gain
  • Deviation From Linear Phase: <1.0 degree, <10 Hz to 200 kHz, 30dB of compression
  • Interchannel Crosstalk: <-100dB, 20 Hz to 20 kHz
  • VCA: dbx V8™
  • VCA Dynamic Range: >127dB
  • VCA THD + Noise: 0.006% typical at +4dBu, 1 kHz, unity gain
  • Stereo Coupling: True RMS Power Summing

Compressor

  • Compressor Threshold Range: -40 to +30dBu
  • Compressor Ratio: 1:1 to Infinity:1
  • Compressor Threshold Characteristic: Selectable OverEasy® or hard knee
  • Compressor Attack/Release Modes: Selectable Manual or Auto
  • Compressor Manual Attack Time: Scalable program-dependent. Typically 400dB/msec to 1dB/msec
  • Compressor Manual Release Time: Scalable program-dependent. Typically 4000dB/sec to 10dB/sec
  • Compressor Auto Attack Time: Program-dependent, typically 15 ms for 10dB, 5 ms for 20dB, 3 ms for 30dB
  • Compressor Auto Release Time: Program-dependent, typically 120dB/sec
  • Compressor Output Gain: -20 to +20dB

Limiter

  • Limiter Threshold Range: +4dBu to >+30dBu (off)
  • Limiter Ratio: 4:1
  • Limiter Type: PeakStopPlus® two-stage limiter
  • Limiter Stage 1: Instantaneous Transient Clamp
  • Limiter Stage 1 Attack Time: Zero
  • Limiter Stage 1 Release Time: Zero
  • Limiter Stage 2: Intelligent Predictive Limiting
  • Limiter Stage 2 Attack Time: Program dependent, typically <5 msec.
  • Limiter Stage 2 Release Time: Program dependent, typically 22dB/sec

General

  • Dimensions: 3.5” H X 19” W X 11.25” D
  • Unit Weight: 20.5 lbs (9.3 kg)
  • Shipping Weight: 25.0 lbs (11.3 kg)
  • Reference: 0dBu = 0.775Vrms
Manufacturer DBX
SKU SDBX160SLB
Model 160SL
GTIN NA
DBX
DBX
160SL
Contact Us

Studiocare Professional Audio Ltd.

Unit 2, 56 Evans Road


Liverpool

L24 9PB


Phone
+44 (0) 151 707 4545
+44 (0) 845 345 8910


Opening Hours
Mon - Fri: 9:30 - 5:30
Sat - Sun: Closed
Help

Contact
How To Find Us
Terms & Conditions
Shipping
Newsletter
Returns Form
Repair Request
Studiocare on FacebookStudiocare on TwitterStudiocare on Google+” width=Studiocare on YoutubeStudiocare on Pintrest

Studiocare
© Copyright Studiocare Professional Audio Ltd. 2016