Skip to content
Free UK Mainland Delivery for Orders Over £99 - Need some advice? Talk to the team on 0151-236-7800
Free UK Mainland Delivery for Orders Over £99

APS SUB 10 - Active 10" Sub Woofer 400W

by APS
£1,428.00 inc. vat
£1,190.00 ex. vat
SKU SAPSSUB10
Special Order Item

APS SUB 10 - Active 10" Sub Woofer 400W

The APS SUB 10 is a professional active studio subwoofer, designed for accurate sound reproduction equipped with sub-bass loudspeaker driver of 29 cm in diameter, class D power amplifier 400W at 4Ohm mounted on the rear panel, there are also calibrated controls, protections, indicators, and the input/output terminals.

SUB 10 is designed for operation in stereophonic or multi-channel systems (5+1 or 7+1 and larger) such as DOLBY, DTS, THX, etc.

This subwoofer is suitable for small/mid-sized:

  • Recording studios
  • Broadcasting studios
  • TV studios
  • Multimedia studios
  • Post production facilities
  • Mastering
  • Digital workstations
  • Home recording studios
  • Audio monitoring systems of the highest quality

Specifications

Subwoofer

  • Type: Active – Class D power amplifier Hypex: 400 W @ 4Ω
  • Dimensions (H x W x D): 39 cm x 39 cm x 40 cm / 15.35" x 15.35" x 15.75"
  • Free Field Frequency Response: ±2.5 dB: 19-90 Hz
  • SPL in Free Field @ 1m:
    • RMS: 108 dB (single subwoofer)
    • Peak: 116 dB (pair of subwoofers)
  • Weight: 24 kg / 53 lbs

Calibrated Controls

  • Input Sensitivity Switch / VOLUME (8 positions): -4.5dB, -3dB, -1.5dB, 0dB, 1.5dB, 3dB, 4.5dB, 6dB
  • Input Sensitivity Switch / VOLUME (3 positions): -20dB, -10dB, 0dB
  • Low-pass filter Switch CUT OFF: 40Hz, 45Hz, 50Hz, 57Hz, 63Hz, 71Hz, 80Hz, 90Hz
  • Filters By-Pass Switch UNFILTERED (LFE):
    • Position down: filters ON
    • Position up: filters OFF
  • PHASE Switch: 0 degrees, 180 degrees
  • STAND-BY Switch:
    • Position down: active STAND-BY
    • Position up: continuous mode (Stand-by OFF)

Loudspeaker

  • Subbass Loudspeaker: Ø 29 cm
  • Diaphragm: cellulose, surround: rubber

Amplifiers

  • Subbass Loudspeaker Power Amplifier: 400 W RMS @ 4 Ω (270 W RMS @ 6 Ω)
  • THD distortions:
    • Typ 0.01%, Max 0.05% 20Hz
    • Max 0.04% 20Hz

Inputs, Outputs

  • INPUT right (R) and left (L):
    • Two types (common socket Combo):
      • - XLR symmetrical (balanced)
      • - TRS symmetrical (balanced) "6.3 mm"
    • and RCA nonsymmetrical
    • Input impedance 10 kΩ
  • "Loop Through” Output: XLR symmetrical, Output impedance 100 Ω

Protections

  • Subbass Loudspeaker Protection: Pop-free start and stop control
  • Power Amplifiers Protections: Overcurrent protection
  • Power Amplifiers Protections: Overvoltage protection

Signaling Devices

  • STAND-BY ON: Orange LED
  • CLIPPING detected: Red LED
  • POWER ON / DC-error detected: Green LED / Red LED