My Cart Checkout Speak to an expert! Call us on 0151 236 7800 0151 236 7800

Ancillary, Studio & Broadcast

Set Ascending Direction

1-10 of 29

Page:
  1. 1
  2. 2
  3. 3
  1. MTR PS-8

    MTR PS-8 - Passive Headphone Splitter 1-8

    An all-steel, RF shielded box houses one stereo jack input feeding 8 stereo jack outputs. The sockets are pcb-mounted, and there is an internal link to mono the unit. Used for example, for splitting headphone signals in music rooms, computer music re...
    £56.88 (inc. vat)
    £47.40 (ex. vat)

  2. MTR HPA-6 - 6 Channel Stereo Headphone Amp

    MTR HPA-6 - 6 Channel Stereo Headphone Amp

    The MTR HPA-6 is perhaps the most high powered and reliable headphone amp available. There are two separate main stereo inputs on quater inch jacks, plus a stereo Auxiliary input feeding stations 1 and 2 (or any combination of all six by simple inter...
    £378.00 (inc. vat)
    £315.00 (ex. vat)

  3. MTR PS-4V - Passive Headphone Splitter 1-4 with 2 Volume Controls

    MTR PS-4V - Passive Headphone Splitter 1-4 with 2 Volume Controls

    The MTR PS-4V is a tough plastic box that houses one stereo jack input feeding 4 stereo jack outputs. The sockets are pcb-mounted, and there is an internal link to mono the unit. Used for example, for splitting headphone signals in music rooms, compu...
    £45.00 (inc. vat)
    £37.50 (ex. vat)

  4. MTR PPS48 - 4 Channel Phantom Power Supply

    MTR PPS48 - 4 Channel Phantom Power Supply

    With a built-in Mains power supply (no 'wall-wort'), this British designed and made unit offers 4 channels of rock-solid 48 volt phantom power, a 'phantom present' led and a rear panel ground lift. With it's superb build quality, reliability and tran...
    £124.55 (inc. vat)
    £103.79 (ex. vat)

  5. MTR PS-4

    MTR PS-4 - Passive Headphone Splitter 1-4

    A tough plastic box houses one stereo jack input feeding 4 stereo jack outputs. The sockets are pcb-mounted, and there is an internal link to mono the unit. Used for example, for splitting headphone signals in music rooms, computer music recording sy...
    £33.36 (inc. vat)
    £27.80 (ex. vat)

  6. 1

    MTR HPA-2 - 2 channel stereo headphone Amp

    Derived from our HPA-6 model, this smaller stand-alone version has one stereo input and one Aux. input on quarter inch jacks, a Loudness button, and two headphone outputs, each with a volume control and a mono button. It is mains powered, with a rear...
    £168.00 (inc. vat)
    £140.00 (ex. vat)

  7. MTR PS-8V - Passive Headphone Splitter 1-8 with Volume Controls

    MTR PS-8V - Passive Headphone Splitter 1-8 with Volume Controls

    The PS-8v has volume controls on channels 1,4,5 and 8, better for use with headphones of differing impedances. All outputs on all models are fully protected by a 10 ohm resistor. An all-steel, RF shielded box houses one stereo jack input feeding 8 st...
    £71.93 (inc. vat)
    £59.94 (ex. vat)

  8. Bel 7150 - 2ch AES3/Analogue Audio Synchronisation Delay Front

    Bel 7150 - 2ch AES3/Analogue Audio Synchronisation Delay

    The Bel 7150 is a 2-channel audio delay unit designed for installation in a broadcast transmission chain, and allows the operator to add precise amounts of delay to the signal. Typically for resolving lip-sync issues. It is ideal for all situations w...
    £1,074.00 (inc. vat)
    £895.00 (ex. vat)

  9. Bel BM-A1-2SHD MKII

    Bel BM-A1-2SHD MKII - 1U 2 Channel Audio Monitor

    The Bel BM-A1-2SHD is a 1U high-quality 2-channel audio monitor, capable of monitoring the audio content of 3G, HD and SD SDI bitstreams....
    £2,754.00 (inc. vat)
    £2,295.00 (ex. vat)

  10. Bel BM-A2-16SHD (Bel BM-A2-E16SHD pictured)

    Bel BM-A2-16SHD - 2U 16 Channel Audio Monitor

    The Bel BM-A2-16SHD is a no-compromise, 2U, 16-channel audio monitor suitable for operation in broadcast control rooms or OB vehicles where SDI is the standard video format....
    £5,154.00 (inc. vat)
    £4,295.00 (ex. vat)

Set Ascending Direction

1-10 of 29

Page:
  1. 1
  2. 2
  3. 3