T: 0151 707 4545

Alto Truesonic TS110A - Active 10" Loudspeaker. 600 Watt 2-Way

£229.99 £191.66 (ex. vat)

Alto Truesonic TS110A

  • Alto Truesonic TS110A
  • Alto Truesonic TS110A
  • Alto Truesonic TS110A Rear
  • Alto Truesonic TS110A Back Panel

Alto Truesonic TS110A - Active 600 Watt 2-Way 10" Loudspeaker

The Alto Truesonic TS110A is an active 2-way loudspeaker with 600 watts of Class D power. The drivers in the Truesonic TS110A are designed to make sure that virtually no energy is wasted. That translates to more of the power from the amplifier actually working to generate sound rather than heat, giving the speaker better real world performance than other speakers with comparable published specifications. The Truesonic TS110A features a 10" LF driver (1.5" voice coil) and a 1" HF driver (Neodymium Driver).

Modern amplifier design
Every active Truesonic speaker benefits from the use of a Class D amplifier integrated into the cabinet. Class D amps are generally lighter than Class A and AB amplifier designs, and offer more than enough power to provide your performance with plenty of punch. The Truesonic TS110A delivers with 600 Watts of power (470 W LF + 130 W HF) and offers a balanced combo jack (XLR/TRS) input.

Versatile Cabinet Design
All Truesonic 2-way speaker cabinets have been designed with versatility and longevity in mind. They feature a durable, lightweight polypropylene enclosure that is stand mountable for weekend gigs and flyable for more permanent installations. What's more, they have a trapezoidal design which greatly decreases the resonance of the standing wave in the cabinet for a more true and exact sound reproduction.

All Truesonic speakers feature standard 36mm pole mounting insets on the bottom. If you need to fly them, it's no problem. The 10" Truesonic models come from the factory with four M10 rigging points, the 12" models come with five. Our 15" models come standard with six M10 rigging points. All these options make the Truesonic one remarkably venue-friendly speaker. Use them anywhere you need them.

Every Truesonic speaker comes with a complete front grille from top to bottom that protects not only your low frequency driver, but your high frequency driver as well. With Truesonic speakers, you get extra peace of mind knowing that whatever comes at your sound system, we've got it covered, literally.

Alto Truesonic TS110A Features

  • 600 Watts Class D power
  • 10” low-frequency transducer, 1” neodymium driver
  • Two Mic/Line combo inputs with independent volume controls
  • XLR output to link speakers
  • Lightweight, trapezoidal cabinet with handle
  • Stand and pole-mountable or flyable
  • Clip Limiter with red LED
  • Ground Lift switch
  • Contour switch for increased EQ control
  • Accurate audience coverage, not just on-axis
  • Use as traditional upright loudspeaker or as floor wedge monitor
  • Designed and tuned in the USA


  • Small/mid-sized PA systems
  • Halls, auditoriums, amphitheaters
  • Bars, restaurants, clubs
  • Gymnasiums, fitness centers, and dance studios
  • Houses of worship
  • Mobile DJ systems
  • Special events, presentations, and weddings


Alto Truesonic TS110A Specifications

  • Transducer Low: 10" Woofer with 1.5" voice coil
  • Transducer High: Neodymium compression driver, 1” exit with 1” voice coil
  • Power Amplification: 600 Watts peak (470 W LF + 130 W HF), 300 Watts continuous (235 W LF + 65 W HF)
  • Frequency Range: (-10 dB): 53 Hz - 20 kHz
  • Frequency Response: (±3 dB): 70 Hz - 19 kHz
  • Maximum SPL @ 1m: 123 dB peak, 120 dB continuous
  • -6 dB Nominal Coverage: 80° / 100° x  60° nominal
  • Active Crossover: 2.5 kHz
  • Connectors:  2 x Mic / Line Female XLR - 1/4” combo inputs, 1 x Loop - Out Male XLR
  • Input Control: Line / Mic -∞ to +50 dB, Maximum input level +23 dBu , Input Impedance 15 kOhms
  • External Controls: Volume, Power switch with LED indicator, Clip/Limit LED, Ground Lift switch
  • Protection Features: Over-excursion, Thermal, Driver
  • AC Power: 100 VAC, or 110 – 120 VAC, or 220 - 240 VAC (50 / 60 Hz)
  • Enclosure: Trapezoidal, with floor monitor capability. Injection molded, polypropylene enclosure, with perforated steel grille
  • Mounting: Integrated pole-socket (36 mm dia.) One Handle, four M10 threaded sockets: 2 top, 2 bottom
  • Dimensions (WxLxH): 20.2in x 12.99in x 11.73in
  • Weight: 26.6 lb
Manufacturer Alto
Model TS110A
GTIN 0816311010610

You may also be interested in the following product(s)

Mackie Thump12 - 12" Two Way Powered Loudspeaker

Mackie Thump12 - 12" Two Way Powered Loudspeaker

£259.00 £215.83 (ex. vat)
Mackie Thump15 - 15" Two Way Powered Loudspeaker

Mackie Thump15 - 15" Two Way Powered Loudspeaker

£299.00 £249.17 (ex. vat)
Contact Us

Studiocare Professional Audio Ltd.

Unit 2, 56 Evans Road


L24 9PB

+44 (0) 151 707 4545
+44 (0) 845 345 8910

Opening Hours
Mon - Fri: 9:30 - 5:30
Sat - Sun: Closed

How To Find Us
Terms & Conditions
Returns Form
Repair Request
Studiocare on FacebookStudiocare on TwitterStudiocare on Google+” width=Studiocare on YoutubeStudiocare on Pintrest

© Copyright Studiocare Professional Audio Ltd. 2016