T: 0151 707 4545

Alto MixPack Express - Ultra-Portable Powered PA System

£340.00 £283.33 (ex. vat)

Alto MixPack Express

  • Alto MixPack Express
  • Alto MixPack Express Closed
  • Alto MixPack Express

Alto MixPack Express - Ultra-Portable Powered PA System with Effects & EQ

The Alto MixPack Express is an ultra-portable powered PA system featuring two 10" speakers and 350 watts of continous power. The system is completed with a built-in mixer and Alesis DSP effects.

MixPack Express comes complete with two 10" speakers and 350 watts of continuous power. All the right connections are present including balanced XLR, balanced/unbalanced TRS and unbalanced RCA so no matter what you need to connect, you're all set. MIXPACK Express also includes two speaker cables in the package so you can get set up in no time. The speakers attach and detach to the amp/mixer module using firm, rugged latches and the entire kit can be carried in one hand thanks to a convenient, molded handle on top.

The built-in mixer on MixPack Express has five input channels with 16 Alesis DSP presets with 24-bit effects for Hall, Room, Vocal, Plate, Stereo Delay, Reverb + Delay and Reverb + Chorus combinations. Fine tune the performance with the integrated 7-band graphic EQ and monitor all of it with the built-in LED and Monitor Out jack.

Alto MixPack Express Featues

  • 350 Watts of continuous power
  • Lightweight, one-piece design for convenient transport
  • Two 10” speakers with cables included
  • Built-in mixer with seven-band graphic EQ and XLR, line and RCA inputs
  • Integrated Alesis DSP with 24-bit effects including reverb, delay and chorus

Alto MixPack Express Specifications

Mixer Section

  • Microphone/Line Input: Electronically balanced, discrele input configuration
  • Frequency Response: 10 Hz to 55 kHz, +/-3 dBu
  • Microphone Input Impedance: 3.9 kΩ
  • Line Input Impedance: 10kΩ
  • Microphone Input S/N ratio:  >94 dBu
  • Microphone Inputs:  Balanced XLR connectors
  • Line Inputs: Balanced / Unbalanced, 1/4' (6.3 mm) TRS jack connectors
  • Tape Inputs: Unbalanced RCA jack
  • Inputs Distortion (THD & N): 0.04% at 0 dBu, 1 kHz
  • Channel EQ High shelving: +/-15 dB @ 12 kHz  Low shelving  +/-15 dB @ 80 Hz                                        
  • Aux Send: 1 with paths for DSP internal section, external DSP section and Monitor Out
  • DSP Section: 24-bit Hall, Room, Vocal, Plate, Stereo Delay, Reverb + Delay and Reverb + Chorus combinations
  • Master Section: Master Level knob, 4 LEDs level meter, 7-band graphic output EQ, and DSP Return level
  • Output Master EQ: 7-band, +/-5 dB @ 63Hz, 160 Hz, 400 Hz, 1 kHz, 2.5 kHz, 6.3 kHz, 16 kHz
  • Monitor Section: Master Level knob, 4 LEDs level meter, and 1/4" (6.3 mm) Monitor Out jack

Speaker Section

  • System Type: 2-way coax vented box
  • Frequency Response: 65 Hz - 20 kHz at -10 dB
  • Spherical horn Coverage: 70° H × 70° V
  • Continuous Power: 150 Watts AES Standard
  • Peak Power: 300 Watts Peak
  • Protection: Electronic circuit on driver
  • Speaker Specification: 10" (254 mm) Low Frequency Driver /  2" (50.8 mm) Voice Coil, 1" (25.4 mm) Neodymium High
  • Input Connectors: 1/4" (6.3 mm) mono (TS) jack on each cabinet

Amplifier Section

  • Output Power: 350 Watts (EIAJ)  
  • Impedance:
  • Protections: Overload / Short Circuit / Soft Clip Limiter / Thermal Protection Fan Cooling

Standard Package

  • Two speaker cables
  • Power cord
  • One microphone cable
  • Stands: F-8 or F-3 not included
Manufacturer Alto
GTIN 0816311010290
Contact Us

Studiocare Professional Audio Ltd.

Unit 2, 56 Evans Road


L24 9PB

+44 (0) 151 707 4545
+44 (0) 845 345 8910

Opening Hours
Mon - Fri: 9:30 - 5:30
Sat - Sun: Closed

How To Find Us
Terms & Conditions
Returns Form
Repair Request

ISO 9001
Studiocare on FacebookStudiocare on TwitterStudiocare on Google+” width=Studiocare on YoutubeStudiocare on Pintrest



© Copyright Studiocare Professional Audio Ltd. 2016