My Cart Checkout Speak to an expert! Call us on 0151 236 7800 0151 236 7800

AEA R92 Ribbon Microphone Pair and TRP Preamp Bundle

AEA R92 Ribbon Microphone Pair and TRP Preamp Bundle
£1,905.12 (inc. vat)
£1,587.60 (ex. vat)

Brand: AEA

Usually Ships in 3 - 5 Days

The AEA R92 stereo bundle is a kit that contains 2 AEA R 92 professional ribbon microphones that comes with a TRP Preamp, hard case and power supply. This microphone has a smooth high frequency response much like the R88 and R84 transducers while combined with it's casing it produced a beautiful unique tone you can only achieve with AEA microphones. Like all figure 8 microphones the R92 is subject to proximity effect allowing you to use this advantage to increase or decrease your your low frequencies as you move you microphone around getting you the perfect sound.
Interested in hiring this product?
Send an enquiry now.
OR
Description

AEA R92 Ribbon Microphone Bundle

The AEA R92 stereo bundle is a kit that contains 2 AEA R 92 professional ribbon microphones that comes with a TRP Preamp, hard case and power supply. This microphone has a smooth high frequency response much like the R88 and R84 transducers while combined with it's casing it produced a beautiful unique tone you can only achieve with AEA microphones. Like all figure 8 microphones the R92 is subject to proximity effect allowing you to use this advantage to increase or decrease your your low frequencies as you move you microphone around getting you the perfect sound.

AEA has designed the R92 to have slightly different tones on the front and rear pickup lobes of the bidirectional microphone. The front lobe of the R92 is the "crisp" side, offering exceptionally clean and realistic high end detail. The rear lobe is the "smooth" side, which has a bit of classic ribbon high end roll-off reminiscent of the iconic 44 that can help to handle harsh transients in a very refined and flattering way. The bass reproduction of the R92 is very solid and extends to the lowest audible bass frequencies.

Features

  • Same Big Ribbon, tuning, and transformer as the R44 series
  • For closer applications and louder sources
  • Compact design with different front and back tonality
  • Versatile for close-up and ambient mic applications
  • Particularly well suited for electric guitar, electric bass, and drums
Specifications

SPECIFICATIONS

R92 Specifications

  • Operating Principle: Pressure gradient microphone
  • Directional Pattern: Bidirectional (Figure-of-8)
  • Frequency Range: 20 Hz to 20 kHz
  • Maximum SPL: 165+ dBSPL (1% third harmonic > 1 kHz)
  • Output Sensitivity: 1.8 mV/Pa (-55 dBV) into unloaded circuit
  • Output Impedance: 270 Ω nominal
  • Recommended Load Impedance: 1.2 kΩ or greater
  • Powering: Not required or recommended
  • Polarity: Pin 2 high for positive pressure on front of microphone.
  • Connector: XLR-3M wired to a 3 m captive cable
  • Ribbon Thickness: 1.8 μ (0.0000018 m) of pure aluminum
  • Ribbon Width: 0.185” (4.7 mm)
  • Ribbon Length: 2.35” (59.7 mm)
  • Weight with Cable: 2 lbs (0.9 kg)
  • Weight with case: 7.5” (19.1 cm)
  • Height: 7.5” (19.1 cm)
  • Width: 2.9” (7.4 cm)
  • Depth: 2.5” (6.4 cm)

TRP Specifications

  • Gain at 1kHz: 83 dB of gain at 1 kHz
  • Noise figure: -130 EIN noise figure
  • Db at 300 kHz: -3 dB at 300 kHz
  • Balanced Microphone Input Impedance: 33K Ohm
  • Phantom power: No phantom power
  • Color LEDs: Green and Red LEDs indicates channel level
  • Balanced XLR: Balanced XLR +4 dBu, and Unbalanced 1/4- inch -10 dBV outputs
  • Size: Half-rack wide, one rack unit high (8.5" x 8.5" x 1.7")
  • Weight: Two pounds, plus power supply is (1.5 lbs.)
Additional Information

Additional Information

Manufacturer AEA
SKU SAEAR92PTRPBUN
Model R92PAIRTRPBUNDLE
GTIN NA